DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Draytek 3300V assing SIP
- telemagic
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
02 Feb 2011 15:31 #66033
by telemagic
Draytek 3300V assing SIP was created by telemagic
I have the 3300v without any voip cards installed.
I dont seem to have any options to setup voip.
I have 2 wan ports connected to 1 x leased line with static public IP and 1 x Broadband with local ip to another router.
I have a Sip server hosted on the internet and am trying to connect to it from within the local network server by the 3300.
I have load balancing turned on with 90% of load going over the broadband.
I have a static rule that any connections to the SIP Server IP go over the leased line.
I am having major issues with phones not registering or when they do register they dont stay registered.
Can anyone help with this?
I cannot seem to find where to turn sip_alg off if this router even has it.
Regards
I dont seem to have any options to setup voip.
I have 2 wan ports connected to 1 x leased line with static public IP and 1 x Broadband with local ip to another router.
I have a Sip server hosted on the internet and am trying to connect to it from within the local network server by the 3300.
I have load balancing turned on with 90% of load going over the broadband.
I have a static rule that any connections to the SIP Server IP go over the leased line.
I am having major issues with phones not registering or when they do register they dont stay registered.
Can anyone help with this?
I cannot seem to find where to turn sip_alg off if this router even has it.
Regards
Please Log in or Create an account to join the conversation.
- dannyboy1121
- Offline
- Junior Member
Less
More
- Posts: 72
- Thank you received: 0
03 Feb 2011 06:50 #66051
by dannyboy1121
Dan
Replied by dannyboy1121 on topic Draytek 3300V assing SIP
I'm not familiar with this model but I turned off sip_alg on mine by connecting to the router via command line and issuing command:
sys sip_alg 0
You can use command: > sys sip_alg ?
.. that will display the current status of sip_alg
May the force be with you ... always.
sys sip_alg 0
You can use command: > sys sip_alg ?
.. that will display the current status of sip_alg
May the force be with you ... always.
Dan
Please Log in or Create an account to join the conversation.
- telemagic
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
03 Feb 2011 14:45 #66064
by telemagic
Replied by telemagic on topic Draytek 3300V assing SIP
This just comes up with invalid input command.
Regards
Regards
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek