DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Set up USB 3G as WAN2 with 2910 and T-Mobile
- hopwood
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
10 Mar 2010 09:47 #61094
by hopwood
Set up USB 3G as WAN2 with 2910 and T-Mobile was created by hopwood
Hi guys,
This should be really simple, right?
I have a T-Mobile contract sim USB in a Huawei E160 dongle. I have configured the 2910 as follows:
General Setup:
Enable: Yes
Display name: dongle
Physical mode: 3G USB modem
Load balance mode: Auto weight
Active mode: always on
Internet access:
PPP Client mode: enable
Modem initial string: APN:general.t-mobile.uk
Modem dial string: ATDT*99#
PPP username: user
PPP Password: one2one
PPP Authentication: PAP or CHAP
If I unplug and replug the dongle it works briefly and shows up green in the online status. But after 5 minutes or so it disconnects and shows the "Message: PPP Disconnect" line in WAN2 status.
Given that I only bought this router to do this job this is extremely frustrating and there doesn't seem to be a DrayTek UK support number available, which is also extremely frustrating.
Really hoping someone can help
Joel
PS: the dongle works fine in a T-Mobile share dock.
This should be really simple, right?
I have a T-Mobile contract sim USB in a Huawei E160 dongle. I have configured the 2910 as follows:
General Setup:
Enable: Yes
Display name: dongle
Physical mode: 3G USB modem
Load balance mode: Auto weight
Active mode: always on
Internet access:
PPP Client mode: enable
Modem initial string: APN:general.t-mobile.uk
Modem dial string: ATDT*99#
PPP username: user
PPP Password: one2one
PPP Authentication: PAP or CHAP
If I unplug and replug the dongle it works briefly and shows up green in the online status. But after 5 minutes or so it disconnects and shows the "Message: PPP Disconnect" line in WAN2 status.
Given that I only bought this router to do this job this is extremely frustrating and there doesn't seem to be a DrayTek UK support number available, which is also extremely frustrating.
Really hoping someone can help
Joel
PS: the dongle works fine in a T-Mobile share dock.
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
10 Mar 2010 11:42 #61102
by voodle
Replied by voodle on topic Set up USB 3G as WAN2 with 2910 and T-Mobile
With that 3G modem it should definitely be simple, which firmware have you got on the 2910?
Please Log in or Create an account to join the conversation.
- hopwood
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
- voodle
- Offline
- Big Contributor
Less
More
- Posts: 1139
- Thank you received: 0
11 Mar 2010 09:33 #61114
by voodle
Replied by voodle on topic Set up USB 3G as WAN2 with 2910 and T-Mobile
That's probably the wireless card firmware, it'd say the actual firmware at the top of the system status page.
If you haven't got it already, I suggest updating to the 3.2.3.1 firmware from here:http://www.draytek.co.uk/support/download/v2910_3231.zip
That modem should really auto-detect, you can check whether it's detecting or not from the Online Status page, there'll be a small icon of a green circle with a mobile phone in it.
If you haven't got it already, I suggest updating to the 3.2.3.1 firmware from here:
That modem should really auto-detect, you can check whether it's detecting or not from the Online Status page, there'll be a small icon of a green circle with a mobile phone in it.
Please Log in or Create an account to join the conversation.
- hopwood
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
11 Mar 2010 09:45 #61115
by hopwood
Replied by hopwood on topic Set up USB 3G as WAN2 with 2910 and T-Mobile
I have now upgraded the 2910 to the latest firmware.
I have had no luck getting either of the following modems to work:
T-Mobile contract E160 / E170
Vodafone contract K3520
I cannot believe there is not a DrayTek UK support phone number!
Joel
I have had no luck getting either of the following modems to work:
T-Mobile contract E160 / E170
Vodafone contract K3520
I cannot believe there is not a DrayTek UK support phone number!
Joel
Please Log in or Create an account to join the conversation.
- hopwood
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
11 Mar 2010 09:52 #61116
by hopwood
Replied by hopwood on topic Set up USB 3G as WAN2 with 2910 and T-Mobile
UPDATE:
I have now got the Vodafone K3250 working with APN:Internet and default modem string.
It's been up about 5 minutes so let's see how long it lasts. The T Mobile one wouldn;t stay up for more than about 10 minutes and gives a status message of PPP Shutdown after that.
Fingers crossed...
Joel
I have now got the Vodafone K3250 working with APN:Internet and default modem string.
It's been up about 5 minutes so let's see how long it lasts. The T Mobile one wouldn;t stay up for more than about 10 minutes and gives a status message of PPP Shutdown after that.
Fingers crossed...
Joel
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek