Hi,

having been faithful draytek user for the last 13 years this one has me stumped..

We have a 2920 with latest firmware and configured it on WAN1 to be virgin media using 5 static ip addresses and WAN2 to failover onto a 2710n which is connected to an ADSL plusnet connection.

We have configured the failover in such a way that if WAN1 cannot ping the virgin media DNS server it will switch over to the WAN2. However, what appears to happen is that it switches to WAN2 but then does not reconnect to WAN1... we have to reboot the 2920 for it to switch back.

So my question.. is there anything that I need to configure with the 2920 so that it will automatically switch back?

Thanks,

Andres