Hello.

I have a Draytek 2862 Router.
I have to create a VPN connection between a third party to allow secure connection to thier software and database.
I have tried to enter the following information below in the LAN to LAN settings but im stuck. Where would I enter the following info.. I have changed the IP addresses for security.

Our internal network is on 192.168 range

Details from the third party.
Your Firewall IP should be: DHCP or STATIC ADDRESS
Your NATTED Subnet should be: 100.65.1.1/255.255.255.0

VPN Information:
Your VPN Source IP should be: DHCP or STATIC ADDRESS

Your Phase1 Information:
Hosted VPN Gateway: 158.25.128.14
IKE Version: IKEv1
IKE Mode: set mode aggressive
IKE Version Setting: set ike-version 1
IKE Peer ID: xxxxxxxxxxx
Proposal: AES-256/sha512
DH-Group: 14
Lifetime: 86400

PSK Info
PSK: xxxxxxxxxx

Your Phase2 Information:
Proposal1_con1:
Proposal: AES256/sha512
DH-Group: 14
Src-Subnet: 100.65.1.1/255.255.255.0
DST-Subnet: 10.128.1.0/24
Lifetime: 86400

Proposal2_SQL:
Proposal: AES256/sha512
DH-Group: 14
Src-Subnet: 100.65.1.1/255.255.255.0
DST-Subnet: 10.128.1.9/32
Lifetime: 86400

Any help would be much appreciated