****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.5.4.2 (Release) Release Date : 4th February 2015 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** Note: Firmware file types *.all - upgrade retaining all previous settings *.rst - upgrade and reset to factory default It is recommended to take a configuration backup prior to upgrading the firmware. [New Features] None. [Improvement] 1. VoIP: Broadsoft call control did not work. 2. VoIP: An account registered via LAN/VPN could experience one way audio under some specific circumstances. 3. Support for UBDDNS DDNS. 4. SSL3 now disabled in favour of TLS by default for web management. [Notes] To improve security, User Mode cannot be configured with a blank password. ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.5.4.1 (Release) Release Date : 15th July 2014 Build Date : 6th July 2014 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] None. [Improvement] 1. Corrected: CVE-2014-0224 CCS injection vulnerability. 2. Corrected: VoIP SIP Registration Status error in TR-069. 3. Corrected: [Firewall]-[Traffic Control] rules did not work correctly in 3G backup mode. 4. Corrected: The IGMP Snoop facility was dropping IGMP packets received from a VLAN-Tagged WAN interface. 5. Corrected: VPN LED would still be lit when an L2TP/IPsec connection was down. 6. Corrected: DHCP improvements. 7. Improved: Added switch port for SNMP traffic analysis. ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.5.4 (Release) Release Date : 14th January 2014 Build Date : 6th January 2014 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] 1. Supports static 6in4 and 6rd tunnel (IPv6). 2. The router's TR-069 facility now supports STUN for NAT traversal. [Improvement] 1. Improved: The maximum frame size for Ping has been increased to 1500. 2. Improved: Added Get Community and Set Community for SNMP. 3. Improved: Added a warning to remind the user if the router is set on a different wireless channel for WDS than the device it is connecting to. 4. Improved: The Start Date on a new Schedule entry has changed from 2000/01/01 to 1970/01/01. 5. Improved: The character “#” can now be used in the router management password. 6. Improved: Added a global WAN IP when IA-PD IPv6 is used. 7. Improved: USB Temperature Sensor supports new USB dongle. 8. Corrected an issue with the Bandwidth Limit function. 9. Corrected: (Vn models only) VoIP SIP call via IP would fail. 10. Corrected: [Firewall]-[Traffic Control] would not work correctly when using 3G backup mode. ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.5.3 (Release) Release Date : 2nd January 2013 Build Date : 14th November 2012 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] 1. Support IGMP V3 proxy. 2. Support IPv6 PPP mode. 3. Support for IPv6RD tunneling technology. 4. Support IPv6 for 6in4 static tunnel which can work for http://www.tunnelbroker.net/ [Improvement] 1. License for WCF (Web Content Filter) cannot be activated. 2. The replace mode within DigitMap of Vigor2130 can't work correctly. 3. Remote VPN host cannot ping LAN hosts after 3G WAN is up then down. 4. WCF (Web Content Filter) does not work for VPN remote-dial-IN users. 5. Wrong ARP packets will be sent out while WAN interface is down and up. 6. Add TR-069 parameters for System Maintenance >> Management web page. ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.5.2 (Release) Build Date : 11th May 2012 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] 1. Traffic Graph added 2. Add Linux file system ext2/ext3. 3. Add USB temperature sensor and SMS alert. 4. Add Management WAN for TR-069 management. 5. Add Relay Agent for DHCP connection. 6. Support auto-reboot. 7. Support Web Portal & E-Bulletin. 8. Support block HTTPS web host for URL filter. 9. Support X.509 in IPSec. 10. Support IPTV WAN and IGMP Proxy for IPTV application. 12. Support Samsung B3730 4G (LTE) usb modem 13. Support dual 3G/56K modem as backup WAN. 14. Support policy route. [Improvement] 1. Change printer server from lprng to dray-lpd to reduce memory usage 2. Support static IP address assignment for remote dial in PPTP 3. Add TFTP Firmware Upgrade mode in WUI 4. Support more 3G modems 5. Add new TR-069 parameters and speed up the response time 6. Add NetBios name display in data flow monitor page 7. Add more options for key life time and phase I proposal for IPSec 8. Add TwoDNS, dtdns.com, tzo.com, dynami.co.za, ht.net ddns.com.cn, dnsomatic.com, selfhost.de, dnsdynamic.org, dnsexit.com, ovh.com, namecheap.com as Dynamic DNS providers 9. Add the field of service name in PPPoE mode 10. Add IPv6 feature on Diagnostics>>Ping and Diagnostics>>Trace Router 11. iPhone4 cannot create PPTP tunnel 12. "Replace" mode within Digit Map can't work correctly 13. An error occurs in IP Address when registered from VoIP WAN 14. RTP TOS of VoIP cannot be modified 15. Incoming P2P VoIP call doesn’t work 16. Web content filter support for HTTPS added ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.5.1.2 (Release) Release Date : 24th February 2012 Build Date : 15th February 2012 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] None [Improvement] 1. Fixed: PPPoE gets IP error while operating in "connect on demand" mode. 2. Fixed: The jumbo frame would cause instability. 3. Improved: Improvements to Wireless isolation and Access Control. 4. Improved: Disable WPS AP PIN method to prevent WPS PIN vulnerability. ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.5.1 (Release) Build Date : 13th May 2011 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] 1. Support GlobalView WCF (web content filter) mechanism 2. Support APP Enforcement for Firewall. 3. Support Wireless Isolation. 4. Support 30,000 NAT sessions. 5. Support schedule control function in APPE, URL Content Filter and Traffic Control rule. 6. Support USB 56k modem backup. 7. Add File Explorer for USB disk. 8. Add new IPv6 tunnel AICCU (Automatic IPv6 Connectivity Client Utility) [Improvement] 1. Improved: Move Samba function under USB Management (WUI). 2. Improved: Support BitTorrent client 2.13. 3. Improved: Add Channel Width for Wireless setting. 4. Improved: Add the Set to Factory Default option in NAT>>Open Ports. 5. Improved: Support for additional 3G devices added 6. Improved: Improvments to VoIP quality 7. Improved: Support Syslog utility classification. 8. Improved: DHCP server Improvments. 9. Improved: Return to factory default by using firmware upgrade (.rst). 10. Fixed: Low ID in eMule caused by UPnP. 11. Improved: Support DPD for L2TP over IPSEC dial-in. 12. Improved: Add "More Route" in PPTP LAN-to-LAN. ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.4.1 Release Date : 4th October 2010 Build Date : 21st September 2010 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [Improvement] 1. Fixed: Clone MAC address function did not work correctly 2. Fixed: The router could not be configured with a LAN IP of 192.168.2.1 3. Fixed: It was not possible to change the management ports for Telnet and HTTP at the same time 4. Fixed: VoIP stability improvement (V model only) ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.4.0 Release Date : 24th August 2010 Build Date : 16th August 2010 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] 1. Added DDNS log 2. Support Multi-VLAN feature 3. Support WMM for WLAN 4. Support WDS for WLAN [Improvement] 1. Improved: WAN connection stability. ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.3.0.1 Release Date : 15th June 2010 Build Date : 15th April 2010 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] 1. Support TR-069 2. Support Wireless MSSID 3. Support smart bandwidth limit (auto bandwidth limit for P2P control) 4. Support Data Flow Monitor V2 (displays hardware NAT per IP with TX and RX rates) 5. Support to export the Syslog / configuration to a text file 6. Support Wake on LAN 7. Support IPv6CP in PPPoE mode 8. Support PING detection for WAN connection 9. Support Always On for IPSec LAN-to-LAN 10. Added CPU/Memory Usage in System Status page 11. Added DNS settings for DHCP Server 12. Added PPTP remote dial-in IP range settings 13. Added FTP port settings 14. Added enable/disable setting for Firewall Access Control List 15. Added the telnet service for Remote Management [Improvement] 1. Fixed: Resolved inter-operability issue with Wii Wireless connection 2. Fixed: WAN connection may disconnect shortly in DHCP mode 3. Fixed: Firmware Upgrade Utility would not work with some hardware configurations. ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.2.0 Release Date : 27th November 2009 Build Date : 19th November 2009 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [New Features] 1. Support IPv6 2. Support Green AP for WLAN 3. Support Aggressive mode for VPN 4. Strengthen the security for configuration backup and restore 5. Support LAN Monitor Port [Improvement] 1. Simplified firewall settings ****************************************************************************** Release Notes for Vigor2130 series Firmware Version : 1.1.1 (First Firmware Release) Release Date : 18th November 2009 Build Date : 21st October 2009 Applicable Models : Vigor2130n Locale : UK Only ****************************************************************************** [End of File]