************************************************************************************* Release Notes for Vigor2500V Series Firmware Version : 2.5.8.2 (UK Release Firmware) Build Date : Tue Jun 28 17:55:4.27 2005 Modem Code : 3.27 (Annex A) Release Date : July 26th 2005 For Model(S) : Vigor2500V ONLY (UK) ********************************************************************************* Note: Firmware file types *.all - upgrade retaining all previous settings *.rst - upgrade and reset to factory default It is recommended to take a configuration backup prior to upgrading the firmware. For support and downloads, please visit www.support.draytek.co.uk This firmware is intended for UK use only. This ZIP contains two versions of the firmware. They are identical except that the .RST version also contains factory default settings for the router, so using that version will clear (wipe) out all of your existing router settings, back to the factory default state. To upgrade your firmware, use the Firmware Upgrade Utility which is supplied on CD-ROM with your router, or can be downloaded. ******************************************************************************************** Changes since Firmware 2.5.7 ---------------------------- - ISDN double-dialling issue corrected (ISDN models only) - Improved compatibility with some other SIP servers - Allow UDP fragmented packets to pass from WAN from LAN. - Corrected V2500Vi ISDN detection issue - Support for ISDN models (Vigor2500Vi) - Support Dial-Plan Utility version 1.0 and above. - Support UK-specific and user defined Tone/Caller ID settings. - Add telnet command "voip dsp micgain" and "voip dsp spkgain" for microphone and speaker gain control. - Corrected Static Route problem. Changes since Firmware 2.5.6 ---------------------------- [1. New Features] - Add Dial-plan telnet command to support dail-plan utility. - Allow inputting DNS server in MPoA setting. [2. Enhancement] - Resolve the browsing problem from UPnP InternetGatewayDevice in My Network Places. - Enhance the DMZ setting for WAN IP Alias. - Increase priority for local service ( Ex. VPN, RADUIS ) and remove the need for the port being added in the Open port or DMZ setting. - Resolved VPN passthrough issue - Improve handling malformed of DNS packet or MX type DNS query. - Improve DMZ host under heavy traffic. - Fix the problem which can't hang up a VoIP call to mobile phone for some ITSP. [END oF FILE]