*********************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.8.2 (Formal Release) Release Date : 18th June 2008 Firmware Build : Fri Jan 4 13:33:9.49 2008 Applicable Models : Vigor2800 / 2800G / 2800V / 2800VG / V2800i / 2800VGi ADSL Firmware : E.38.2.23 (UK Standard) E.67.36.1 (Alternative) Other alternative modem firmware is at ftp://ftp.draytek.com/Vigor2800/Firmware Locale : UK ONLY, Annex A *********************************************************************************** Note: Firmware file types *.all - upgrade retaining all previous settings *.rst - upgrade and reset to factory default It is recommended to take a configuration backup prior to upgrading the firmware. For more UK product details & specification, please visit www.draytek.co.uk For UK support, visit www.support.draytek.co.uk NOTE : In PPPoA setup, be sure to select the correct modulation type to ensure quickest line synchronisation. For regular ADSL or ADSLMax, the setting is "G.DMT". [New Functions] - Support Trace Route and Ping Diagnosis functions for 3.5G connection. - Support Traffic Graph for 3.5G connection. - Support Bandwidth Limit function for 2nd subnet usage. - Support TFTP ALG. - Support provider 'TwoDNS' in Dynamic DNS function. - Support new 3.5G modems: C-Motech D-50, CDU-550, Sierra 875U, ASUS T500 and OVATION MC950D - Add telnet command \"Srv nat ipsecpass\" for IPSEC NAT passthrough. [Improvements & Corrected Problems] - Improve ISDN loop through\'s echo problem. - Improve the stability for ISDN remote dial in. - Fix the problem that PPTP HOST-To-LAN can only set up 16 VPN connections. - Fix the problem that VoIP Peer to Peer call by dailing IP address cannot work with 3.5G connection. - Fix NAT not working correctly issue when ISDN Backup is enabled. - Correct ADSL2+ Annex M online status in WUI. Currently supported 3G Modems: Huawei E156G Huawei E160G Huawei E160 Huawei E169 Huawei E172 Huawei E219 Huawei E220 Huawei E272 ZTE AC8700 ZTE MF622 ZTE MF626 Sierra Aircard 880U 4G System XSPlug P3 Zapp Telemodem Z020 Option GlobeSurfer iCON 7.2 Option Globesurfer iCON Benq EF91 LG U8380 Nokia 6233 Nokia N70 Nokia N95 Telstra HSDPA USB Modem Telstra Next G 3G USB *********************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.8.1 (Formal Release) Release Date : 10th February 2008 Firmware Build : Fri Jan 4 13:33:9.49 2008 Applicable Models : Vigor2800 / 2800G / 2800V / 2800VG / V2800i / 2800VGi ADSL Firmware : E.38.2.23 (UK Standard) E.67.2.55 (New UK Recommended) Alternative modem firmware is at ftp://ftp.draytek.com/Vigor2800/Firmware/V2.8.1 Locale : UK ONLY, Annex A *********************************************************************************** [New Features] - Support PPPoE to PPPoA Pass-through function. - New ADSL Modem Code (E.67.2.55) Tuned for ADSLMax and lower quality lines [Improvements & Corrected Problems] - Improve ISDN and 3.5G backup mechanism with MPoA mode. - Improve PPPoE interoperability. - Improve the stability of Wireless. - Improve inbound QoS function in PPPoA mode. - Improve WAN IP Alias with NAT Open Port and Port Redirection. - Improve DDNS client's updating function. - Fix display error in the web page of Wireless station list. - Increase UPnP port mapping capacity from 10 to 30. - Support more 3.5G modems *********************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.8 (Formal Release) Release Date : 20th July 2007 Firmware Build : Applicable Models : Vigor2800 / 2800G / 2800V / 2800VG / V2800i / 2800VGi ADSL Firmware : E.38.02.23 (UK Standard) Alternative modem firmware is at ftp://ftp.draytek.com/Vigor2800/Firmware/V2.7.2 Locale : UK ONLY *********************************************************************************** For more UK product details & specification, please visit www.draytek.co.uk For UK support, visit www.support.draytek.co.uk NOTE : In PPPoA setup, be sure to select the correct modulation type to ensure quickest line synchronisation. For regular ADSL or ADSLMax, the setting is "G.DMT". If you have line sync. problems, the alternative firmwares may help. If you do use the alternative firmwares, please be sure to report your experience/findings to support in order that compatibility can be monitored/improved. ADSL Modem code version is shown in the Online Status screen. Always use standard UK modem code (e380223) where possible. [New Features] - Support 3G USB Modem Backup. [Improvements & Corrected Problems] - Add the patterns of KAD network(eDonkey) and iMesh7(FastTrack) for P2P Blocking function. - Add EOC information of CPE on modem code E67.2.55 and E74.2.35. - Improve ISDN call function. - Correct a reboot issue relating to digit-map usage with short prefixes *********************************************************************************** Release Notes for Vigor2800 series Firmware Version : 2.7.2 (Formal Release) Release Date : 15 June 2007 Firmware Build : Applicable Models : Vigor2800 / 2800G / 2800V / 2800VG / V2800i / 2800VGi ADSL Firmware : E.38.02.23 (UK Standard) Alternative modem firmware is at ftp://ftp.draytek.com/Vigor2800/Firmware/V2.7.2 Locale : UK ONLY *********************************************************************************** [New Features] - Add new option "post dial" for VoIP Hotline faciluty. - Add assignable ring port for ISDN Loop-through. - Support MSN number for ISDN Loop-through. - Support Annex M in modem code E.38.2.23, E.67.2.12, E.67.2.40, E.67.2.52 and E.67.2.55. - Support WAN IP Alias in Port Redirection rule. [Improvements & Corrected Problems] - Extend the length of Authentication Username to 64 characters in Mail Alert Setup. - Improve the interoperability of Telnet command "ppp_mss" in Static IP mode of MPoA. - Switch to to ISDN provided DNS Server when ISDN Backup is active. - Correct and issue where 802.1X with WEP mode wasn't operating - Extend the MAC Address Control to 64 entries in Wireless General Setup. - Improve wireless VLAN - Improve ISDN Loop-through performance [Known issues / Notes ] 1. Wireless setting issue. - There is an interoperability issue if wireless security setting is mixed mode (WEP or WPA/WPA2-PSK) and clients baed on the Ralink RT2571 or RT2561 chipsets 2. BeThere (ISP) are using ADSL2+ with an Broadcom extension which allows an INP setting of 2. The ADSL2+ standard limits sync. speed to 7.5Mb/s if INP setting is above 2, except with this optional extension. This is not supported by the Vigor2800. If your ISP is providing ADSL2+ but your line is fixed at 7.5Mb/s (approx), request that they change your INP setting to a value below 2 (e.g. 1.5, 1, 0.5 or none). Please also note that BeThere use different ADSL settings for your router from all other ISPs so please refer to their support guide for settings (e.g. MPoA, VCI/VPI). *********************************************************************************** Firmware Version : 2.7.1 (Formal Release) Release Date : 24 Oct 2006 Firmware Build : Fri Sep 22 2006 17:07:35.84 *********************************************************************************** [New Features] - Add TCP ACK Prioritize on QoS. - Add Traffic Graph function on WUI - Add ISDN Loop-Through on Digit Map. [Improvements & Corrected Problems] - Improve the PPPoE compatibility. - Improve the DHCP interoperability on MPoA. - Improve the wireless WDS stability. - Improve X.509. - Improve the PPP stability on ISDN. - Allow Web/Telnet management from VPN (when remote mgt. is not allowed) *********************************************************************************** Firmware Version : 2.7 (Formal Release) Release Date : 20th June 2006 Firmware Build : Tue Jun 6 15:4 2006 *********************************************************************************** [Improvements & Corrected Issues] 1. New Feature : Wireless VLAN. 2. New Feature : Add IP Bandwidth Management (limit session and limit bandwidth). 3. New Feature : Data Flow Monitor function. 4. Add telnet command "adsl maxdnrate [value]" to set maximum downstream rate for ADSL. 5. Add switch settings for syslog message. 6. Add Wake on LAN, Ping Diagnosis and Trace Route functions. The new functions can be found in the new manual available from http://www.draytek.com. Release 2.6.4.1 --------------- [Improvements & Corrected Issues] 1. Corrected DMZ/Multi-NAT Address Mapping Issue 2. When users have a public subnet allocated, it's now possible to force the WAN IP address from the web interface (PPPoA setup page). This saves having to use MultiNAT just for that, and will be especially useful for BT customer who otherwise get a dynamic IP address and previously had to set up WAN 2nd IP commands from telnet. 3. Corrected an issue whereby the 'Restrict Web' feature prevented attachment download 4. Add static routes for setting subnet for management when use VPN default route as the internet access backbone. 5. Improve VoIP pass through for non-VoIP model. 6. Improve X.509 compatibility for second Identity profile. 7. Correct a boot issue due to DPD log while executing Telnet command "log -wt". 8. Improve ISDN backup function. 9. Improve FTP remote firmware upgrade. 10. Improve DDNS compatibility with ChangeIP DDNS provider. 11. Added two Telnet commands "wan ppp_mru" and "wan ppp_ipcp_vso" to adjust the size of PPP LCP MRU and enable/disable PPP IPCP VSO (Vendor Specific Option). 12. Prevent remote management through 2nd IP if remote managaement is disallowed. 13. Improve open port function after WAN connection drops and reconnects 14. Update firewall function to prevent attacks of MSBlast. 15. Change default setting of ADSL's modulation from Multimode to G.DMT Release 2.6.4 ------------- [Improvements & Corrected Issues] 1. Improve WDS (Wireless Distribution System) Performance 2.VPN, IPSec - Support IPSec Multiple SA (Destination Oriented). Support multiple concurrent IPsec tunnels with a single IPsec peer. This single IPsec peer can have more than 1 network domains on LAN side and can negotiate different SAs for each network domain. 3. Add SNTP daylight saving function (GMT/BST) 4. Improve the interoperability for MPoA DHCP clients. 5. Fix a booting issue after upgrading v2.6.3.1 from earlier versions. 6. Support CFG ID to prevent restoring wrong configuration file Release 2.6.3.1 --------------- [Improvements & Corrected Issues] - Correct an issue with G.DMT mode selection - Improve support for IP-unnumbered on PPPoA - Correct issue where entering a .100 in the Dial Out IP Address could cause incorrect address allocation. - Correct the IP Filters Backup/Restore issue. - Add a .CFG file signature to prevent users restoring the wrong cfg. Release 2.6.3 --------------- [Improvements & Corrected Issues] - Enforce daily DDNS update (prevent server timeout/expiry) - Improve the capibility of forcing down VPN tunnel by schedule - Improve status reporting in VPN connection managemnet - Improve ACL operation in WLAN Super-G mode - Improve STA getting IP when connecting for the 1st time in WPA mode - Correct the syncronization of the settings in Basic and Advanced of QoS settings. - Correct the NAT-Loopback issue between the 1st and 2nd LAN subnets - Correct an issue with the generation of WPA group key. - Ensure that IGMPv1 packets are in the correct format. - Correct the issue that incomplete IKE Quick Mode would occupy a virtual interface. - Set PPPoA correctly from the Quick Start Wizard. - Add support for IPSec NAT-travesal (NAT-T). Release 2.6.1.1 --------------- First Formal Release for product [End of File]