XV. VigorACS and VigorConnect

How to schedule a CPE to reboot periodically via VigorACS 2

Vigor ACS
acs reboot
reboot router
Show all

This article will demonstrate how to configure a schedule for a CPE to reboot periodically on VigorACS 2.

Configure the Reboot Profile

1. Go System Menu > Maintenance > Device Reboot, switch to Reboot Settings Profile tab and click Add to create and configure the profile:

  • Name: Specify the name for your backup profile
  • Period (days): Specify how often should the reboot be triggered. If you set up the period to 7 days, it means the CPE will reboot once a week. (However, please notice that in one day, each CPE can only reboot once at maximum).
  • Reboot Time:
    Now: ACS will reboot CPE when receives the next inform from CPE.
    Schedule: ACS will reboot the CPE when receives the first inform from CPE between the Start Time and End Time.
    Schedule Profile: Select the Schedule profile created from Maintenance > Schedule Profile. ACS will reboot the CPE when receives the first inform from CPE between the period set in the schedule profile.

           Here we select Scheduled option. It also allows us to specify the start date when will this profile take effect. Then Save the settings.

schedule reboot ACS

2. Go to Networks & Devices tab, the reboot settings profile could be applied per network or device.

apply to device

How to check if the robot has taken place?

All of the reboot events will be recorded in Monitoring > Logs > Device Reboot. The prefix of CommandKey describes the reboot type:
- ProReboot: ACS rebooted the CPE by schedule reboot profile
- ManuReboot: ACS rebooted the CPE when administrator clicked reboot from Device Menu > Configuration > System > Maintenance



If the reboot did not happen:
1. Check the server time: The scheduled time in the reboot profile should be base on the ACS server time instead of your computer's system time.

system time

2. Make sure Periodic Inform is enabled on CPE. The reboot will be triggered when the CPE sends an inform to the ACS server, so please make sure you have select "Enable" for Periodic Inform Settings on System Maintenance >> TR-069 setting of CPE WebUI.

period inform