DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
3.8.1.9 VigorBX 2000 PSTN problem
- sofasurfa
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 14
- Thank you received: 0
24 May 2018 10:13 #1
by sofasurfa
3.8.1.9 VigorBX 2000 PSTN problem was created by sofasurfa
After upgrading to firmware 3.8.1.9 I have found it impossible to call in or out via a PSTN trunk. Incoming calls are eventually dropped although the PBX call log shows them as having been sent to voicemail. Outgoing calls immediately play the busy tone (engaged for fellow UKers.) I have tried upgrading to both the .all and .rst files then restoring my settings. It matters not which way I do the upgrade. I used the Draytek email support form to report this last night but I'm not sure if it went through as the browser page didn't give any acknowledgement after hitting send. I guess I'll find out eventually. In the meantime, I've downgraded the firmware to 3.8.1.8 and everything is fine (apart from the terrible audio quality which has been an issue since day one.) Has anyone else had any similar problem and did you find a solution?
Please Log in or Create an account to join the conversation.
- sofasurfa
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 14
- Thank you received: 0
24 May 2018 14:26 #2
by sofasurfa
Replied by sofasurfa on topic Re: 3.8.1.9 VigorBX 2000 PSTN problem
Well the support email did get through. If I get a resolution through that process I'll post the results here for the benefit of anyone experiencing the same sort of problem.
Please Log in or Create an account to join the conversation.
- coops021
- Offline
- Junior Member
-
Less
More
- Posts: 14
- Thank you received: 0
15 Jun 2018 10:08 #3
by coops021
Replied by coops021 on topic Re: 3.8.1.9 VigorBX 2000 PSTN problem
I had an issue with non of the services working, such as voicemail, I didn't test the PSTN.
Anyway here is a link to the Beta Firmware Version Draytek sent me which solved my issue, its's worth giving it a go.https://www.dropbox.com/s/0cu6lf0inutzyk3/vbx2k_3883_RC1_VT3.all?dl=0
Anyway here is a link to the Beta Firmware Version Draytek sent me which solved my issue, its's worth giving it a go.
Please Log in or Create an account to join the conversation.
- coops021
- Offline
- Junior Member
-
Less
More
- Posts: 14
- Thank you received: 0
15 Jun 2018 10:22 #4
by coops021
Replied by coops021 on topic Re: 3.8.1.9 VigorBX 2000 PSTN problem
Have you tried to change the codec for the call quality issue?
IP PBX >> PBX System >> Phone Setting
I found this to help.
IP PBX >> PBX System >> Phone Setting
I found this to help.
Please Log in or Create an account to join the conversation.
- sofasurfa
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 14
- Thank you received: 0
15 Jun 2018 14:14 #5
by sofasurfa
Replied by sofasurfa on topic Re: 3.8.1.9 VigorBX 2000 PSTN problem
I have messed around quite a lot with codecs & mic/speaker gain. I have it in a usable state although the audio quality really does leave a lot to be desired.
The security advisory which accompanied the release of 3.8.1.9 leads me to believe that my configuration is not at great risk from the associated vulnerability so, unless events prove me wrong, I'll stick with 3.8.1.8 until a release from Draytek supercedes 3.8.1.9. Thanks for offering the beta though.
The security advisory which accompanied the release of 3.8.1.9 leads me to believe that my configuration is not at great risk from the associated vulnerability so, unless events prove me wrong, I'll stick with 3.8.1.8 until a release from Draytek supercedes 3.8.1.9. Thanks for offering the beta though.
Please Log in or Create an account to join the conversation.
- sofasurfa
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 14
- Thank you received: 0
09 Oct 2018 21:43 #6
by sofasurfa
Replied by sofasurfa on topic Re: 3.8.1.9 VigorBX 2000 PSTN problem
3.8.8.4 allows outgoing calls but incoming calls are not forwarded to an extension. Anyone else having this problem?
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek