DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820 should be 3 WAN setup not 2 WAN as currently

  • coderus
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
08 May 2009 09:42 #55686 by coderus
Hi,
Being a SME, I use the 2820 via cable modem (Virgin ISP) and switch off the WAN1 (ADSL) port. But in this mode I cannot use the 3G Modem as a fall back like I would if I was ADSL user.

So I would like to see WAN2 setup separated so that the Ethernet and USB 3G support are separate WAN setups, so I would see this either WAN3 for USB 3G modem or maybe add WAN1 to have support for the USB 3G modem ?

Thanks

Please Log in or Create an account to join the conversation.

More
25 Jun 2009 23:36 #56486 by doubledutch
Replied by doubledutch on topic 2820 should be 3 WAN setup not 2 WAN as currently
+1

Please Log in or Create an account to join the conversation.

More
09 Aug 2009 23:51 #57109 by robingb
Me too

Please Log in or Create an account to join the conversation.

More
16 Oct 2009 10:44 #58300 by nick2906
Add me to the list !

At the very least, make it easier to change between WAN2 and the 3G port.

Please Log in or Create an account to join the conversation.

More
01 Feb 2010 11:06 #60207 by itf
Add me to the list, I have 2 3G dongles and I would like to plug one in to the USB port and one into the WAN port (through a seperate router).

Please Log in or Create an account to join the conversation.

More
01 Feb 2010 17:36 #60236 by voodle
I'm interested in this too, I'm using WAN2 for ethernet with 3G as the backup, having the router even do failover to the 3G when WAN2 goes down would be good, although 3 WAN would be even better.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami