DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2800VG web interface problem
- paulh177
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
02 Jul 2010 19:46 #62657
by paulh177
2800VG web interface problem was created by paulh177
I've had my 2800VG for a few years and it has been pretty bullet-proof so far.
However, in the past few days if I go into the router's web interface, sometimes I'm getting blank grey areas, sometimes "cannot contact server" or just a very slow or no response.
Rebooting after leaving it off a while hasn't helped.
I use Opera 10.54 mostly and have FF3 installed, and it occurs with both.
This is all on XP Home SP3, with ZA and AVG
I am running a pretty ancient firmware though -- 2.7.1 / E.38.2.23 Annex A from 2006
Any suggestions other than reflashing firmware or updating to a later firmware?
tia for any help
However, in the past few days if I go into the router's web interface, sometimes I'm getting blank grey areas, sometimes "cannot contact server" or just a very slow or no response.
Rebooting after leaving it off a while hasn't helped.
I use Opera 10.54 mostly and have FF3 installed, and it occurs with both.
This is all on XP Home SP3, with ZA and AVG
I am running a pretty ancient firmware though -- 2.7.1 / E.38.2.23 Annex A from 2006
Any suggestions other than reflashing firmware or updating to a later firmware?
tia for any help
Please Log in or Create an account to join the conversation.
- rct
- Offline
- New Member
Less
More
- Posts: 9
- Thank you received: 0
- paulh177
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
02 Jul 2010 22:28 #62660
by paulh177
Replied by paulh177 on topic Re: 2800VG web interface problem
paulh177 wrote:
Rebooting after leaving it off a while hasn't helped.
Please Log in or Create an account to join the conversation.
- rct
- Offline
- New Member
Less
More
- Posts: 9
- Thank you received: 0
03 Jul 2010 06:59 #62662
by rct
Replied by rct on topic 2800VG web interface problem
sorry - perhaps a full system reset by pushing in the button on the back of the router with a paperclip? Back up settings first though.
Please Log in or Create an account to join the conversation.
- paulh177
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
03 Jul 2010 08:30 #62663
by paulh177
Replied by paulh177 on topic 2800VG web interface problem
i'd completely forgotten about that! shows how well it's performed all these years ... thanks, will give it a try
Please Log in or Create an account to join the conversation.
- paulh177
- Topic Author
- Offline
- New Member
Less
More
- Posts: 6
- Thank you received: 0
03 Jul 2010 12:18 #62666
by paulh177
Replied by paulh177 on topic 2800VG web interface problem
yep, that seems to have sorted it out nicely.
There was clearly something wrong - as well as the http interface being flaky, I found I couldn't ftp into it to backup the config and firmware (but managed to do so with the web interface -- and yes I did have remote ftp enabled) ... although oddly enough I could telnet in OK.
thanks very much for clarifying what you meant and so pointing me in the correct direction
There was clearly something wrong - as well as the http interface being flaky, I found I couldn't ftp into it to backup the config and firmware (but managed to do so with the web interface -- and yes I did have remote ftp enabled) ... although oddly enough I could telnet in OK.
thanks very much for clarifying what you meant and so pointing me in the correct direction
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek