DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

VLAN Tag Priority

  • allawishous
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
15 Nov 2018 13:15 #1 by allawishous
VLAN Tag Priority was created by allawishous
Hi All,

I searched all the manuals, knowledgebase etc etc and can not find anywhere info on VLAN Tag Priority within a Draytek Vigor...

Can someone advise if 0 or 7 is highest? Want to ensure my VoIP VLAN traffic is prioritised over the LAN. I have put 7 for now as I did recall seeing on some random forum its higher the number, but it wasn't official...

See image as below:





Thank you.

Please Log in or Create an account to join the conversation.

  • prushmere
  • User
  • User
More
16 Nov 2018 09:33 #2 by prushmere
Replied by prushmere on topic Re: VLAN Tag Priority
From the manual for my 2926:

Priority
– Valid values are from 0 to 7, where 1 has the
lowest priority, followed by 0, and finally from 2 to 7 in
increasing order of priority.

Please Log in or Create an account to join the conversation.

  • allawishous
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Nov 2018 10:41 #3 by allawishous
Replied by allawishous on topic Re: VLAN Tag Priority

prushmere wrote: From the manual for my 2926:

Priority
– Valid values are from 0 to 7, where 1 has the
lowest priority, followed by 0, and finally from 2 to 7 in
increasing order of priority.



Thanks for having a look and posting this.

A little confused as to what priority 0 gets then... ? If 1 is lower than 0? Or am I reading that wrong?

Please Log in or Create an account to join the conversation.

  • prushmere
  • User
  • User
More
16 Nov 2018 10:54 #4 by prushmere
Replied by prushmere on topic Re: VLAN Tag Priority
Yeah, confused the hell out of me too! :lol:

I can only assume that 0 is 'default' priority and 1 is 'less than default' - kinda like, "Yeah, yeah, when I get around to it." :roll:

Please Log in or Create an account to join the conversation.

  • allawishous
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
16 Nov 2018 11:33 #5 by allawishous
Replied by allawishous on topic Re: VLAN Tag Priority

prushmere wrote: Yeah, confused the hell out of me too! :lol:

I can only assume that 0 is 'default' priority and 1 is 'less than default' - kinda like, "Yeah, yeah, when I get around to it." :roll:



:lol:

Hopefully maybe draytek can confirm where "zero" fits in :)


Thank's again! I will set 7 for VoIP and 1 for Other data, i guess...

Please Log in or Create an account to join the conversation.

  • prushmere
  • User
  • User
More
16 Nov 2018 12:13 #6 by prushmere
Replied by prushmere on topic Re: VLAN Tag Priority
As far as I know, Draytek don't actually read this forum - might be worth firing off an email to support...

Good luck! :)

Please Log in or Create an account to join the conversation.