Hi,

Have a Vigor 2830n Annex A.

See pictures.

The router has been recently upgraded I hope to the correct version of firmware ? 3.6.8.2_sb_232201 ???

Anyway the router fell on the floor and one of the antennas broke maybe this is the problem ? Anyway all the settings seem ok and the lan is working fine. But I cannot find a wireless signal ???

Any suggestions would be amazing!

Thank you

Regards

D

https://www.dropbox.com/s/9igaf34mlg9xb6k/draytek.jpg?dl=0

https://www.dropbox.com/s/m2ux32shylut4u4/firmware.png?dl=0

https://www.dropbox.com/s/b3umfbvekoiluu3/screenshot.png?dl=0

PS: Just to note that antenna I have put back in the unit

Does the wireless menu appear in the web interface ?
Are you sure it's a single band model ?

Hi,

Yes the wireless settings appear in the menu. Its all turned on.

See pictures below.

I think its a single band version thats what I believe I have flashed it with ?

See below.

https://www.dropbox.com/s/m2ux32shylut4u4/firmware.png?dl=0

i have attached a picture of the front of the unit. I think its version 1.

https://www.dropbox.com/s/dgtwlj8b687bcpc/draytek%20front.jpg?dl=0

Thanks for you reply!

Any questions do not hesitate to contact me.

Regards

D

Well, you can tell if it's single or dual from this guide:
http://www.draytek.co.uk/support/guides/kb-vigor-2830-dual-band

But if you are using the right f/w I think you broke it
Try a complete reset (backup first).

Hi everyone,

Still need help with this.

Everything works fine except no WiFi. One of the antennas is broken ? Will it not function if one is not working and or just running 2 antennas.

Now running

Firmware 3.6.8.4sb

From here:

http://www.draytek.co.uk/download/support/v2830sb_3684_232201.zip

Can anybody confirm this is the correct firmware.

Want to establish the problem is not software related.

BR

D