Expired

XV. VigorACS and VigorConnect

Expired

VigorConnect - Add VigorSwitch to VigorConnect

Products:
VigorConnect
VigorSwitch G1080
VigorSwitch G1085
VigorSwitch G1280
Show all

Keywords:
monitoring
switch
vc
vigorconnect
Show all

VigorConnect is the LAN/VPN AP and VigorSwitch management software which is based on the TR-069 protocol. To manage and monitor the VigorSwitch's status, we need to add the switch into VigorConnect first. VigorConnect supports the auto-discovery feature that can automatically configure necessary TR-069 settings.


This document demonstrates how to add the VigorSwitch to your VigorConnect.
If you wish to use an automated process to add a wireless AP click here.

Launch the VigorConnect service. Then open the browser and type https://IP:port to login to the VigorConnect.
By default VigorConnect uses the following configuration:

  • HTTP port: 9292
  • HTTPS port: 4433
  • Login Username: root
  • Login Password: admin123

kb vigorconnect add vigorswitch 01

Add VigorSwitch with the Discover option

1. Press the Discover button to use the automated discovery option which lists all DrayTek compatible devices

kb vigorconnect add vigorswitch 02

2. VigorConnect will list discovered VigorSwitches. 
Select the switch and change the password if your VigorSwitch does not use default credentials. Then press Add.

kb vigorconnect add vigorswitch 03

3. The following message should pop-up; press OK to continue

kb vigorconnect add vigorswitch 04


4. The Dashboard page will display newly added device(s). Your VigorSwitch will join the Root Network and should be ready for the management and monitoring.

kb vigorconnect add vigorswitch 05

Add Your VigorSwitch into a Different Network Group

1. Go to Network Management and click Add new network to create a new network group.

kb vigorconnect add vigorswitch 06

2. Select your VigorSwitch, drag and drop into e.g. 'DrayTek' network that was created.
The confirmation message should pop-up asking: 'Are you sure to move [your device name] into "DrayTek" network?' Press OK to continue

kb vigorconnect add vigorswitch 07

3. Your VigorSwitch will join the new network group and should be ready for the management and monitoring.

kb vigorconnect add vigorswitch 08


How do you rate this article?

1 1 1 1 1 1 1 1 1 1