DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820 issues
- ellisrm
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
27 Jan 2010 09:23 #60091
by ellisrm
2820 issues was created by ellisrm
Hi,
1. Has anyone seen any problems such as VPN dropping out? In "VPN and Remote Access >> LAN to LAN" page with the default setting of call direction dial out, always on, -1 this happens intermittantly?
I have set to call direction both and timeout 0 to see what happens.
The other end of this VPN is a checkpoint firewall.
2. Has anyone had any issues with the Diagnostics >> Traffic Graph staying blank and not updating?
Cheers
Rick
1. Has anyone seen any problems such as VPN dropping out? In "VPN and Remote Access >> LAN to LAN" page with the default setting of call direction dial out, always on, -1 this happens intermittantly?
I have set to call direction both and timeout 0 to see what happens.
The other end of this VPN is a checkpoint firewall.
2. Has anyone had any issues with the Diagnostics >> Traffic Graph staying blank and not updating?
Cheers
Rick
Please Log in or Create an account to join the conversation.
- odyssey
- Offline
- Junior Member
Less
More
- Posts: 12
- Thank you received: 0
01 Feb 2010 17:07 #60232
by odyssey
Replied by odyssey on topic 2820 issues
The VPN's are sometimes a little bit flakey. When I have problems like this its usually an address / subnet issue. Make sure the local and public addresses and subnets are correct on both devices. Also latest firmware would be worth a go. I remember reading in the release notes somewhere that nmap scanns can crash the router. (The router crashing or rebooting would also cause the vpn to disconnect / reconnect)
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek