Hi people,

I have a real niggling issue with one of my customers.

As of this afternoon the WAN2 connection will NOT connect.
This is connected directly to a Netgear DG834G
I have public IP Addresses assigned to WAN2 and the LAN IP of the Netgear.
This has worked fine all week until now.
I've noticed the Access Mode is set to None, when I change back to Static or Dynamic IP it goes straight back to None once I've browsed to a different page.

I do know this connection to the Netgear works as I've connected through it to a laptop that was configured with the same Public IP and gateway as the Draytek, so it's definitely the 2950 is the issue.

If anyone can help me ASAP that would be fantastic??

Cheers

Steve

Load balance policy?

All enabled

Protocol - TCP
WAN - WAN2
Dest Start Ports - 25, 80, 110, 443, 3389
Dest End Ports same

Protocol - any
WAN - WAN1
Src IP Start 192.168.1.170
End 192.168.1.170

Cheers

Have you tried setting WAN 2 IP range to 0.0.0.0 - so that it catches anything...?