DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Slow speeds on BT (Vigor 130)
- teessidechris78
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 0
04 Jun 2019 21:08 #1
by teessidechris78
Slow speeds on BT (Vigor 130) was created by teessidechris78
So had a pretty stable connection with the Openreach HG612 since the start of the year, a few disconnections here and there but nothing to serious, was also getting a 53d/18u with a 23ms ping.
But after purchasing the Vigor 130, right from the off speed decreased from 53d/18u to 38d/18u but the ping remained the same (23ms)
Speeds dropped have dropped further to 33d/15u and the ping increased to 31ms due to a few mini disconnection but after a week of line stability ping has gone back down to 21ms but speed remains low, this normal for the Vigor 130? or will the speed go back to what it was on the HG612 at some point.
Vigor has been connected for almost 4 weeks now.
Line stats are
Vigor> vdsl status
ATU-R Info (hw: annex A, f/w: annex A/B/C)
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 55862000 bps US Actual Rate : 20000000 bps
DS Attainable Rate : 63956568 bps US Attainable Rate : 20426791 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 814 US Interleave Depth : 1
NE Current Attenuation : 18 dB Cur SNR Margin : 5 dB
DS actual PSD : 6. 6 dB US actual PSD : 6. 7 dB
NE CRC Count : 34 FE CRC Count : 6744
NE ES Count : 8 FE ES Count : 4688
Xdsl Reset Times : 0 Xdsl Link Times : 2
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
ATU-C Info
Far Current Attenuation : 24 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544eb206
DSLAM CHIPSET VENDOR : < IFTN >
But after purchasing the Vigor 130, right from the off speed decreased from 53d/18u to 38d/18u but the ping remained the same (23ms)
Speeds dropped have dropped further to 33d/15u and the ping increased to 31ms due to a few mini disconnection but after a week of line stability ping has gone back down to 21ms but speed remains low, this normal for the Vigor 130? or will the speed go back to what it was on the HG612 at some point.
Vigor has been connected for almost 4 weeks now.
Line stats are
Vigor> vdsl status
ATU-R Info (hw: annex A, f/w: annex A/B/C)
Running Mode : 17A State : SHOWTIME
DS Actual Rate : 55862000 bps US Actual Rate : 20000000 bps
DS Attainable Rate : 63956568 bps US Attainable Rate : 20426791 bps
DS Path Mode : Interleave US Path Mode : Fast
DS Interleave Depth : 814 US Interleave Depth : 1
NE Current Attenuation : 18 dB Cur SNR Margin : 5 dB
DS actual PSD : 6. 6 dB US actual PSD : 6. 7 dB
NE CRC Count : 34 FE CRC Count : 6744
NE ES Count : 8 FE ES Count : 4688
Xdsl Reset Times : 0 Xdsl Link Times : 2
ITU Version[0] : fe004452 ITU Version[1] : 41590000
VDSL Firmware Version : 05-07-06-0D-01-07 [with Vectoring support]
Power Management Mode : DSL_G997_PMS_L0
Test Mode : DISABLE
ATU-C Info
Far Current Attenuation : 24 dB Far SNR Margin : 6 dB
CO ITU Version[0] : b5004946 CO ITU Version[1] : 544eb206
DSLAM CHIPSET VENDOR : < IFTN >
Please Log in or Create an account to join the conversation.
- piste basher
- Offline
- Big Contributor
-
Less
More
- Posts: 1162
- Thank you received: 2
05 Jun 2019 11:03 #2
by piste basher
Replied by piste basher on topic Re: Slow speeds on BT (Vigor 130)
I don't like the look of that interleaving figure on the DS. Despite what people say I've never had the DSLAM increase my speed after a reduction due to frequent disconnects. A quick call to my ISP (Zen) and they re-set the line, all sorted.
Please Log in or Create an account to join the conversation.
- adrianh54
- Offline
- Member
-
Less
More
- Posts: 428
- Thank you received: 0
05 Jun 2019 11:25 #3
by adrianh54
Replied by adrianh54 on topic Re: Slow speeds on BT (Vigor 130)
I have exactly the same issue and it is the interleaving (and high SNR) causing the problem.
Normally I find 2/3 weeks waiting for the DSLAM to sort things out works fine, this time the issue has just got worse.
Something happened at the ECI cabinet mid March, our line dropped for 2 hours, on reconnection I went from full 80/20 to 51/18 and very high pings and interleaving on upstream.
Several other people I know , all on ECI cabinets and Vigor 130's had the same thing happen and the same level of interleaving applied.
As Piste Basher says , call the ISP.
Normally I find 2/3 weeks waiting for the DSLAM to sort things out works fine, this time the issue has just got worse.
Something happened at the ECI cabinet mid March, our line dropped for 2 hours, on reconnection I went from full 80/20 to 51/18 and very high pings and interleaving on upstream.
Several other people I know , all on ECI cabinets and Vigor 130's had the same thing happen and the same level of interleaving applied.
As Piste Basher says , call the ISP.
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
-
Less
More
- Posts: 1723
- Thank you received: 0
05 Jun 2019 14:43 #4
by admin
Forum Administrator
Replied by admin on topic Re: Slow speeds on BT (Vigor 130)
Did you try alternative modem code ?
Forum Administrator
Please Log in or Create an account to join the conversation.
- teessidechris78
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 0
05 Jun 2019 15:18 #5
by teessidechris78
Replied by teessidechris78 on topic Re: Slow speeds on BT (Vigor 130)
Not changed anything on the modem since it was plugged in, read somewhere it was fine just plugging the Vigor 130 in and leaving it with it's default settings but did update the firmware to the latest one.
Might give BT a call to see if they can reset my line but I have a feeling that they'll want the HH6 plugged in before doing any tests.
Not sure if the interleaving stats are the same as they are on the HG612 but they seemed higher (not sure if that's a good or bad thing) but below are the last stats I got from the HG612
This information shows the latest ONGOING stats obtained at 23:59 on 10/05/2019
________________________________________________________________________________________________________________
actual_t_of_day = 1557529147 i.e. Fri May 10 23:59:07 2019
AS = 1658213
time of resync (actual_t_of_day - AS) = 1555870934 i.e. Sun Apr 21 19:22:14 2019
Connection up time: 19 days 4 hours 36 minutes & 53 seconds Last Resync recorded at 21/04/2019 19:38
Firmware version: A2pv6C038m.d24j Retrain Reason: 0
________________________________________________________________________________________________________________
Downstream Upstream Downstream Upstream
Sync (kbps) 57600 20000 Interleaving 1069 1
Attainable rate (kbps) 64120 23093 INP 3.00 0.00
Attenuation (dB) 19.2 0.0
SNR Margin (dB) 6.9 7.0
Power (dBmV) 6.1 6.1 SES (total) 0 41
RSUnCorr errors (delta) 0 0 RSUnCorr errors (total) 90089 0
Errored seconds (delta) 0 0 Errored seconds (total) 418 367
Bitswaps (delta) 40 0 Bitswaps (total) 1183819 5929
CRC errors (delta) 0 0 CRC errors (total) 1707 507
HEC errors (delta) 0 0 HEC errors (total) 20886 0
FEC errors (delta) 211 0 FEC errors (total) 8464576 9498
________________________________________________________________________________________________________________
Might give BT a call to see if they can reset my line but I have a feeling that they'll want the HH6 plugged in before doing any tests.
Not sure if the interleaving stats are the same as they are on the HG612 but they seemed higher (not sure if that's a good or bad thing) but below are the last stats I got from the HG612
This information shows the latest ONGOING stats obtained at 23:59 on 10/05/2019
________________________________________________________________________________________________________________
actual_t_of_day = 1557529147 i.e. Fri May 10 23:59:07 2019
AS = 1658213
time of resync (actual_t_of_day - AS) = 1555870934 i.e. Sun Apr 21 19:22:14 2019
Connection up time: 19 days 4 hours 36 minutes & 53 seconds Last Resync recorded at 21/04/2019 19:38
Firmware version: A2pv6C038m.d24j Retrain Reason: 0
________________________________________________________________________________________________________________
Downstream Upstream Downstream Upstream
Sync (kbps) 57600 20000 Interleaving 1069 1
Attainable rate (kbps) 64120 23093 INP 3.00 0.00
Attenuation (dB) 19.2 0.0
SNR Margin (dB) 6.9 7.0
Power (dBmV) 6.1 6.1 SES (total) 0 41
RSUnCorr errors (delta) 0 0 RSUnCorr errors (total) 90089 0
Errored seconds (delta) 0 0 Errored seconds (total) 418 367
Bitswaps (delta) 40 0 Bitswaps (total) 1183819 5929
CRC errors (delta) 0 0 CRC errors (total) 1707 507
HEC errors (delta) 0 0 HEC errors (total) 20886 0
FEC errors (delta) 211 0 FEC errors (total) 8464576 9498
________________________________________________________________________________________________________________
Please Log in or Create an account to join the conversation.
- teessidechris78
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 0
05 Jun 2019 16:08 #6
by teessidechris78
Replied by teessidechris78 on topic Re: Slow speeds on BT (Vigor 130)
So called BT and they did a test of my line...........................after the 5 minute 'test' they did say that my speed has dropped over the last 4 weeks, they're going to send out a replacement HH6, didn't bother asking if I was actually using the HH6 or not.
Did an noise test myself an there wasn't anything.
Did an noise test myself an there wasn't anything.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek