DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 130 Power Supply Jack Size
- nextgenav
- Topic Author
- Offline
- Banned
-
Less
More
- Posts: 2
- Thank you received: 0
26 May 2021 16:39 #1
by nextgenav
Vigor 130 Power Supply Jack Size was created by nextgenav
Hi,
I need to use one of my old Vigor 130s on a job and wondered if anyone knew the jack dimensions for the power port. It's not the normal 5.5mm / 2.1mm pin
Thanks in advance
I need to use one of my old Vigor 130s on a job and wondered if anyone knew the jack dimensions for the power port. It's not the normal 5.5mm / 2.1mm pin
Thanks in advance
Please Log in or Create an account to join the conversation.
- nextgenav
- Topic Author
- Offline
- Banned
-
Less
More
- Posts: 2
- Thank you received: 0
28 May 2021 17:24 #2
by nextgenav
Replied by nextgenav on topic Re: Vigor 130 Power Supply Jack Size
No responses, but in case anyone else needs to know it is a 2.5mm x 5.5mm jack to power it.
These are the ones I used:https://cpc.farnell.com/powerpax/std-1202b25/ac-dc-power-supply-12v-2a-uk-2/dp/PW03080
These are the ones I used:
Please Log in or Create an account to join the conversation.
- admin3
- Offline
- Site Admin
-
Less
More
- Posts: 604
- Thank you received: 0
02 Jun 2021 09:58 #3
by admin3
Forum Administrator
Replied by admin3 on topic Re: Vigor 130 Power Supply Jack Size
Sorry, I didn't see your message over the bank holiday weekend. The Vigor 130 and the Vigor routers use 2.5mm ID and 5.5mm OD, so that power supply will work with it. The exact replacement PSU part for it is DrayPSU16, but the one you've linked will work.
Forum Administrator
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek