Hi,

Did anyone manage to configure the IPPBX with Gradwell.com? i have a sip trunk with them configured with Trixbox but i can't do the same to the Draytek PBX, please help

One more thing.. when i dial an extension 101 to 102 it takes couple of seconds before it actually dials it unless i press dial .. is there any way to fix that..

Any Help is greatly appriciated ..

Thanks

Here is what i understood so far.

1. IP PBX will not work with gradwell SIP trunks
2. Gradwell can't support the IP PBX, that means Draytek has to add different ways of SIP registration rather than sticking with only 1 method
3. IF you must use the Draytek IP PBX then you have to apply for the Multiuser SIP account, and register each Line separatly.. it should work this way only.

If you need more details .. just reply

Why won't it work with Gradwell ?

Telneting the voip port, you receive message
Method not supported when you try to register a gradwell sip trunk. it seems the method draytek is using only works with gradwell centrex service but not the SIP trunks one.

Hm...maybe a simple compatibility thing... have you reported it to support ?

Yes,

and they said they will work on it..