DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Remote extension on VigorIPPBX 2820, How?
- rich1231
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
06 Jan 2010 10:43 #59663
by rich1231
Remote extension on VigorIPPBX 2820, How? was created by rich1231
I want some staff to be able to use their extensions off site (from home), how can i get their extensions to work as per the diagrams in the VigorIPPBX 2820 manual...
There are diagrams but no instructions..
Any help appreciated.
Thanks
There are diagrams but no instructions..
Any help appreciated.
Thanks
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
06 Jan 2010 18:08 #59678
by admin
Forum Administrator
Replied by admin on topic Remote extension on VigorIPPBX 2820, How?
The SIP/Server address needs to be the public IP address of your PBX.
Forum Administrator
Please Log in or Create an account to join the conversation.
- asimm.it
- Offline
- Member
Less
More
- Posts: 156
- Thank you received: 0
10 Feb 2010 04:04 #60449
by asimm.it
Replied by asimm.it on topic Remote extension on VigorIPPBX 2820, How?
hi rich,
I think this can only be currently achieved using over a VPN connection.
I think this can only be currently achieved using over a VPN connection.
Please Log in or Create an account to join the conversation.
- timbelfall
- Offline
- Junior Member
Less
More
- Posts: 22
- Thank you received: 0
10 Feb 2010 12:38 #60457
by timbelfall
Replied by timbelfall on topic Remote extension on VigorIPPBX 2820, How?
I have this working using the public IP address of the IPPBX. But I did have trouble with some home routers, Netgear especially, blocking the remote handsets outbound traffic (remote user could hear the calling party but the calling party could not hear the remote handset).
In the end I had to update the firmware of the Netgear router, but it's not perfect.
In the end I had to update the firmware of the Netgear router, but it's not perfect.
Please Log in or Create an account to join the conversation.
- asimm.it
- Offline
- Member
Less
More
- Posts: 156
- Thank you received: 0
10 Feb 2010 14:45 #60458
by asimm.it
Replied by asimm.it on topic Remote extension on VigorIPPBX 2820, How?
hi timbelfall,
did you need to open up any additional ports or use stun/proxy server settings to achieve that?
did you need to open up any additional ports or use stun/proxy server settings to achieve that?
Please Log in or Create an account to join the conversation.
- timbelfall
- Offline
- Junior Member
Less
More
- Posts: 22
- Thank you received: 0
11 Feb 2010 22:13 #60481
by timbelfall
Replied by timbelfall on topic Remote extension on VigorIPPBX 2820, How?
Hi,
I didn't use a STUN server, though I looked at doing this. The major problem was the router at the remote side. Netgear had to have a firmware upgrade and the SIP passthrough setting checked. The Dlink's I have were not a problem.
Regards
Tim
I didn't use a STUN server, though I looked at doing this. The major problem was the router at the remote side. Netgear had to have a firmware upgrade and the SIP passthrough setting checked. The Dlink's I have were not a problem.
Regards
Tim
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek