DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

IPPBX 2820 Gradwell SIP Configuration

  • whammer
  • Topic Author
  • Offline
  • New Member
  • New Member
More
27 Jan 2010 17:25 #60116 by whammer
IPPBX 2820 Gradwell SIP Configuration was created by whammer
Hi,

Did anyone manage to configure the IPPBX with Gradwell.com? i have a sip trunk with them configured with Trixbox but i can't do the same to the Draytek PBX, please help

One more thing.. when i dial an extension 101 to 102 it takes couple of seconds before it actually dials it unless i press dial .. is there any way to fix that..

Any Help is greatly appriciated ..

Thanks

Please Log in or Create an account to join the conversation.

  • whammer
  • Topic Author
  • Offline
  • New Member
  • New Member
More
04 Feb 2010 12:56 #60329 by whammer
Replied by whammer on topic IPPBX 2820 Gradwell SIP Configuration
Here is what i understood so far.

1. IP PBX will not work with gradwell SIP trunks
2. Gradwell can't support the IP PBX, that means Draytek has to add different ways of SIP registration rather than sticking with only 1 method
3. IF you must use the Draytek IP PBX then you have to apply for the Multiuser SIP account, and register each Line separatly.. it should work this way only.

If you need more details .. just reply

Please Log in or Create an account to join the conversation.

More
11 Feb 2010 12:51 #60477 by admin
Replied by admin on topic IPPBX 2820 Gradwell SIP Configuration
Why won't it work with Gradwell ?



Forum Administrator

Please Log in or Create an account to join the conversation.

  • whammer
  • Topic Author
  • Offline
  • New Member
  • New Member
More
11 Feb 2010 13:09 #60478 by whammer
Replied by whammer on topic IPPBX 2820 Gradwell SIP Configuration
Telneting the voip port, you receive message
Method not supported when you try to register a gradwell sip trunk. it seems the method draytek is using only works with gradwell centrex service but not the SIP trunks one.

Please Log in or Create an account to join the conversation.

More
12 Feb 2010 15:31 #60493 by admin
Replied by admin on topic IPPBX 2820 Gradwell SIP Configuration
Hm...maybe a simple compatibility thing... have you reported it to support ?



Forum Administrator

Please Log in or Create an account to join the conversation.

  • whammer
  • Topic Author
  • Offline
  • New Member
  • New Member
More
12 Feb 2010 15:32 #60494 by whammer
Replied by whammer on topic IPPBX 2820 Gradwell SIP Configuration
Yes,

and they said they will work on it..

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami