DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Trunk line display
- modcoms
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
25 Feb 2011 14:19 #66462
by modcoms
Trunk line display was created by modcoms
Hi
We have the 2820 IPBX we have 2 ISDN lines into the PBX when we get an incoming call it displays 903*xxxxxxxxxxxx or 904*xxxxxxxxxxxx is there a way of stripping the 903-904 off the display we are using the vigor 350 phones
We have the 2820 IPBX we have 2 ISDN lines into the PBX when we get an incoming call it displays 903*xxxxxxxxxxxx or 904*xxxxxxxxxxxx is there a way of stripping the 903-904 off the display we are using the vigor 350 phones
Please Log in or Create an account to join the conversation.
- asimm.it
- Offline
- Member
Less
More
- Posts: 156
- Thank you received: 0
01 Mar 2011 23:10 #66566
by asimm.it
Replied by asimm.it on topic Re: Trunk line display
hi modcoms,
As far as I am aware this is not currently possible with the latest firmware.
It sure would be useful if this could be changed or atleast given a friendly name!
It might be worth sending a feature request to support.
As far as I am aware this is not currently possible with the latest firmware.
It sure would be useful if this could be changed or atleast given a friendly name!
It might be worth sending a feature request to support.
Please Log in or Create an account to join the conversation.
- macavity
- Offline
- Member
Less
More
- Posts: 225
- Thank you received: 0
04 Mar 2011 21:54 #66639
by macavity
Replied by macavity on topic Re: Trunk line display
You can strip it off I think. I think there is a telnet command to change it for the ISDN trunk.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek