Hi,
Afraid I a am a newbie to VOIP although I do IT as a living
I have got a Vigor2110 and can receive inbound SIP and PSTN calls without a problem. However, I cannot dial out. Whenever I do the following happens:-
- Get dial tone.
- Enter number (Vigor status says "processing")
- After a period of time I get an engaged tone (Vigor status says "hang up").
I am not sure how to produce a config dump (if someone can advise if needed) but the output of the telnet log is below....
OPTIONS sip:8478153@82.12.171.16 SIP/2.0
Via: SIP/2.0/UDP 217.14.138.154:5065;branch=0
From: sip:
vnt-10@voiptalk.org;tag=b7e1e9a8
To: sip:
8478153@voiptalk.org
Call-ID: 8e3db8a6-8b56e5b5-49c4f@217.14.138.154
CSeq: 1 OPTIONS
Content-Length: 0
-->Send Message to 217.14.138.154:5065 <14:49:54>
SIP/2.0 200 OK
Via: SIP/2.0/UDP 217.14.138.154:5065;branch=0
From: <sip:
vnt-10@voiptalk.org>;tag=b7e1e9a8
To: <sip:
8478153@voiptalk.org>;tag=rds-23930
Call-ID: 8e3db8a6-8b56e5b5-49c4f@217.14.138.154
CSeq: 1 OPTIONS
Thanks
Will
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, INFO, REFER, NOTIFY
Content-Length: 0