DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

TIP: 2800V, VoIP and FTTC (VDSL)

  • dhumble
  • Topic Author
  • Offline
  • New Member
  • New Member
More
24 Dec 2012 16:53 #74612 by dhumble
TIP: 2800V, VoIP and FTTC (VDSL) was created by dhumble
I have had Fibre broadband since August 2012 and my Draytek Vigor 2800V has become just a Printer Server. Until now. I have now worked out how I can get past the WAN port to use it for VPN + VoIP again.

Visit my Blog at http://taurusii.blogspot.co.uk/2012/12/using-draytek-vigor-2800v-after-fibre.html for the Howto.
David

Draytek 2800V Firmware: 2.7_E38

Please Log in or Create an account to join the conversation.

More
11 Jun 2013 19:24 #76517 by nigel pallett
Replied by nigel pallett on topic Re: TIP: 2800V, VoIP and FTTC (VDSL)
Excellent HOWTO !! 8)

I'm upgrading to FTTC broadband soon and this howto will help me retain my 2800Vg for VoIP and VPN purposes.

Thank so much for this info.

Please Log in or Create an account to join the conversation.

More
14 Jun 2013 17:47 #76587 by nigel pallett
Replied by nigel pallett on topic Re: TIP: 2800V, VoIP and FTTC (VDSL)

dhumble wrote: I have had Fibre broadband since August 2012 and my Draytek Vigor 2800V has become just a Printer Server. Until now. I have now worked out how I can get past the WAN port to use it for VPN + VoIP again.

Visit my Blog at http://taurusii.blogspot.co.uk/2012/12/using-draytek-vigor-2800v-after-fibre.html for the Howto.



I've successfully set up my 2800Vg as per the above HOWTO, but I cannot get the new "deafult route" setting to survive reboots.

Does anyone know how I can make my new setting persist following reboots ?

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami