DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
DHCP Lease Time
- lectrician
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 72
- Thank you received: 0
14 Sep 2008 12:39 #51921
by lectrician
DHCP Lease Time was created by lectrician
Is is possible to alter the lease time for DHCP?
I am running a DHCP server for an open WiFi area, and it would be nice to get a rough idea of usuage by looking at the DHCP assignments.
At the moment, a person can aquire an IP Address, use the internet for a couple of minutes, and then never return. The DHCP assignement remains for a fair while though.
I am running a DHCP server for an open WiFi area, and it would be nice to get a rough idea of usuage by looking at the DHCP assignments.
At the moment, a person can aquire an IP Address, use the internet for a couple of minutes, and then never return. The DHCP assignement remains for a fair while though.
Please Log in or Create an account to join the conversation.
- andycooper
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
16 Feb 2009 14:10 #54388
by andycooper
You can set the lease time through telnet. For example to set lease time to an hour (3600 seconds), the last line is a check to see if it has applied.
At a command prompt:
telnet
srv set leasetime 3600
srv set leasetime ?
Replied by andycooper on topic Re: DHCP Lease Time
Is is possible to alter the lease time for DHCP?Lectrician wrote:
I am running a DHCP server for an open WiFi area, and it would be nice to get a rough idea of usuage by looking at the DHCP assignments.
At the moment, a person can aquire an IP Address, use the internet for a couple of minutes, and then never return. The DHCP assignement remains for a fair while though.
You can set the lease time through telnet. For example to set lease time to an hour (3600 seconds), the last line is a check to see if it has applied.
At a command prompt:
telnet
srv set leasetime 3600
srv set leasetime ?
Please Log in or Create an account to join the conversation.
- lectrician
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 72
- Thank you received: 0
25 Mar 2009 19:44 #55037
by lectrician
Replied by lectrician on topic DHCP Lease Time
Bump, Bump, Bumpaty Bump!
Sorry, forget I even posted this!
I have tried this command through telnet and it says the command is unknown?
This is the Vigor 2800G?
Sorry, forget I even posted this!
I have tried this command through telnet and it says the command is unknown?
This is the Vigor 2800G?
Please Log in or Create an account to join the conversation.
- benji
- Offline
- Junior Member
Less
More
- Posts: 44
- Thank you received: 0
- coderus
- Offline
- Junior Member
Less
More
- Posts: 67
- Thank you received: 0
- benji
- Offline
- Junior Member
Less
More
- Posts: 44
- Thank you received: 0
24 Mar 2010 16:22 #61342
by benji
Replied by benji on topic DHCP Lease Time
I havent tested this specific setting but I dont see why it shouldnt. Other telnet only settings do that I have used.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek