DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Configuring Seperate Private Subnet for DMZ on WAN2
- akarbani
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
21 Nov 2008 15:38 #1
by akarbani
Configuring Seperate Private Subnet for DMZ on WAN2 was created by akarbani
I have a 192.168.1.0/24 subnet used for private clients which is NAT'd to a single public IP Address on WAN1. I have another 3 public IP address which can be added as WAN IP Aliases and each one needs to be NAT'd to 3 different Internal Servers on Subnet 10.0.0.0/24. At the moment i have a choice of maintaining the same subnet 192.168.1.0/24 for the DMZ hosts, applying the public IP addresses to the servers as True DMZ hosts or Having a totally different subnet for the DMZ hosts and using NAT for basic security. Can the latter be accomplished on a Draytek VigorPro 5510 with dual wan interfaces, that way i can plug my DMZ switch to the Second LAN interface and segregate the networks further?
Please Log in or Create an account to join the conversation.
- sean.hennessy
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
28 Apr 2010 20:46 #2
by sean.hennessy
Replied by sean.hennessy on topic response on this
Hi there.
Did you receive a response or an answer on this as i am looking to implement the same?
Thanks
Did you receive a response or an answer on this as i am looking to implement the same?
Thanks
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek