Hi,
I need to enable HTTP management on a 3300 through telnet, but when ever i enter the code it always fails with a "Input arguments invalid".
Below is the port help from the draytek session, the draytek 3300 telnet pdf differs slightly with the syntax commands. I have tried both ways but it always errors.
Draytek login: draytek
Password:
Login by remote client
DrayTek> system
DrayTek/system> port ?
Full Name:
Manage Port Function
Description:
You need to reboot to make changes took effect
Syntax:
port -s (Display manage port setting)
port -r (reboot to apply the changes)
port -m <Use Default Port or Not> <Manage from WAN>
port -e <HTTP Enable> <TELNET Enable> <SSH Enable>
port -p <Http> <Telnet> <SSH>
port -i <index> <IP> <Subnet Mask>
Parameters:
<Use Default Port or Not> 0 : Default ; 1 : User Define
<Http> default: 80
<Telnet> default: 23
<SSH> default: 22
<Manage from WAN>
0 : Disable all from Wan;
1 : Enable all from Wan;
2 : Enable only defined Wan IP;
<Permit IP> ex. 1.2.3.4
DrayTek/system>
Cheers
Rich
