Hi,
I have a 3300v configured with 2x public ADSL internet connections, configured as follows:

WAN1

---

Backup-Master
PPPoE Configuration (ADSL presented via Draytek 100 Ethernet modem)

WAN2

---

Backup-Slave
Static Configuration (ADSL Netgear router, Draytek recieves a single Public IP address on the WAN2 interface)

If the WAN1 interface should fail the WAN2 automatically takes over. This works fine in principle, however we have services that must run on WAN1 for reasons of IP address allocation etc.
The problem is when WAN1 comes back up the 3300v doesn't automatically fail back over to this interface. The only way to get it up and running again is to hard-power on/off the firewall. Is there a way around it. It seems to failover perfectly fine but I cant establish a mechanish to get it to fail back again.

Thanks,
Phil