DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Unable to Turn Off QoS on Vigor 2820
- davrosg5
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 7
- Thank you received: 0
12 Aug 2009 18:18 #1
by davrosg5
Unable to Turn Off QoS on Vigor 2820 was created by davrosg5
For some reason I don't seem to be able to switch of the QoS setting on my Vigor 2820.
In the Multi-PVCs set up screen I have removed the ticks from the 'Enable' check boxes on the WAN 1 and WAN 2 boxes and clicked on OK. The QoS light on the router remains lit. If I reboot the router using the current settings the Enabled options are selected again.
Am I trying to switch QoS off in the correct place? Any ideas why it won't switch off?
In the Multi-PVCs set up screen I have removed the ticks from the 'Enable' check boxes on the WAN 1 and WAN 2 boxes and clicked on OK. The QoS light on the router remains lit. If I reboot the router using the current settings the Enabled options are selected again.
Am I trying to switch QoS off in the correct place? Any ideas why it won't switch off?
Please Log in or Create an account to join the conversation.
- macavity
- Offline
- Member
-
Less
More
- Posts: 225
- Thank you received: 0
14 Aug 2009 10:37 #2
by macavity
Replied by macavity on topic Unable to Turn Off QoS on Vigor 2820
You can disabled QoS via the Quality of Service menu in the Bandwidth Management section.
Please Log in or Create an account to join the conversation.
- davrosg5
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 7
- Thank you received: 0
Moderators: Sami
Copyright © 2024 DrayTek