DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2820Vn - Can't see internal network
- karl101
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
01 Sep 2009 13:31 #1
by karl101
2820Vn - Can't see internal network was created by karl101
Hello,
I just upgraded my 2820Vn to the latest firmware 3.3.2.1 (UK Official Release)
I have two ports open in the Port Redirection 80 and 22, pointing to a linux server with a static IP address and I have the address for WAN2, my broadband, registered at dyndns.org
I can access the web server and SSH as expected from outside, from work or elsewhere, but can't see the server when I try its dyndns.org address from my PC connected to my network from my side of the router. I use OpenDNS and have checked there, it is OK.
Doing a traceroute gives a request timed out response
Any Ideas?
Karl
I just upgraded my 2820Vn to the latest firmware 3.3.2.1 (UK Official Release)
I have two ports open in the Port Redirection 80 and 22, pointing to a linux server with a static IP address and I have the address for WAN2, my broadband, registered at dyndns.org
I can access the web server and SSH as expected from outside, from work or elsewhere, but can't see the server when I try its dyndns.org address from my PC connected to my network from my side of the router. I use OpenDNS and have checked there, it is OK.
Doing a traceroute gives a request timed out response
Any Ideas?
Karl
Please Log in or Create an account to join the conversation.
- turls
- Offline
- Banned
-
Less
More
- Posts: 6
- Thank you received: 0
02 Sep 2009 11:30 #2
by turls
Replied by turls on topic 2820Vn - Can't see internal network
I have exactly same issue from wan2 - from wan1 it is fine - have open support request.
It looks like the router does not recognise the router ip and perform loopback connections
Will update on call
It looks like the router does not recognise the router ip and perform loopback connections
Will update on call
Please Log in or Create an account to join the conversation.
- macavity
- Offline
- Member
-
Less
More
- Posts: 225
- Thank you received: 0
02 Sep 2009 11:55 #3
by macavity
Replied by macavity on topic 2820Vn - Can't see internal network
NAT loopback is a known issue with this firmware. It's mentioned in the release notes.
Please Log in or Create an account to join the conversation.
- turls
- Offline
- Banned
-
Less
More
- Posts: 6
- Thank you received: 0
02 Sep 2009 12:20 #4
by turls
Replied by turls on topic 2820Vn - Can't see internal network
This has only just been added!
I downloaded from dreytek.com and it is not in those release notes
Why release a "stable" version when there are known issue!!! This should be at least be beta.
There does not even appear links to older versions so you can downgrade
I downloaded from dreytek.com and it is not in those release notes
Why release a "stable" version when there are known issue!!! This should be at least be beta.
There does not even appear links to older versions so you can downgrade
Please Log in or Create an account to join the conversation.
- macavity
- Offline
- Member
-
Less
More
- Posts: 225
- Thank you received: 0
02 Sep 2009 14:28 #5
by macavity
Replied by macavity on topic 2820Vn - Can't see internal network
I think that 3.3.1.2 doesn't have the issue
http://www.draytek.co.uk/support/download/v2820_3312_232201_A.zip
Please Log in or Create an account to join the conversation.
- karl101
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
Moderators: Sami
Copyright © 2024 DrayTek