DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Firewall Setup
- ian.rowan
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
06 Sep 2009 19:54 #1
by ian.rowan
Firewall Setup was created by ian.rowan
HIi,
I have a customer that wants all outbound except web blocked from all workstation. this has been done but to support the workstations I need to enable logmein, I thought logmein used ports 443 and 80 but found that it uses loads more dymanic ports, has anyone else already done this and knwo the whole range of ports used by logmein or if there is an easy way to do this
Many thanks
Ian
I have a customer that wants all outbound except web blocked from all workstation. this has been done but to support the workstations I need to enable logmein, I thought logmein used ports 443 and 80 but found that it uses loads more dymanic ports, has anyone else already done this and knwo the whole range of ports used by logmein or if there is an easy way to do this
Many thanks
Ian
Please Log in or Create an account to join the conversation.
- paulj48
- Offline
- Junior Member
-
Less
More
- Posts: 50
- Thank you received: 0
07 Sep 2009 09:11 #2
by paulj48
Replied by paulj48 on topic Firewall Setup
According to here https://secure.logmein.com/US/support/free/default.aspx
only 80, 443 and 2002 are used
only 80, 443 and 2002 are used
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek