DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
DynDNS not working well with 2 WANs
- solintel
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
09 Sep 2009 22:18 #1
by solintel
DynDNS not working well with 2 WANs was created by solintel
Hi guys, I'm new in this forum so first of all, hello to everyone.
My problem is that I have a 2820 with 2 WANs enabled, WAN1 is ADSL with Jazztel (I live in Spain) and WAN2 is Ethernet-connected to another ISP. Both of the WANs have Static IP.
I've configured a Dynamic DNS in DynDNS, and I've configured the first dynamic dns account in the 2820 with that parameters. The fiels "WAN Interface" is set to "WAN2 First" so, when the dynamic dns client checks the IPs, first checks WAN2 and, if it is enabled, assigns WAN2 Public IP to the dyndns account. If WAN2 is down, then checks WAN1 and if it is enabled, assigns WAN1 Public IP to the dyndns account.
But the problem is that the 2 WAN Interfaces (WAN1 and WAN2) are enabled, traffic goes out by the two WANs, but the dyndns account is always the WAN1 Public IP, instead of WAN2 Public IP.
What is the problem? (I'm getting crazy looking for a solution)
Thank you all for tour cooperation
My problem is that I have a 2820 with 2 WANs enabled, WAN1 is ADSL with Jazztel (I live in Spain) and WAN2 is Ethernet-connected to another ISP. Both of the WANs have Static IP.
I've configured a Dynamic DNS in DynDNS, and I've configured the first dynamic dns account in the 2820 with that parameters. The fiels "WAN Interface" is set to "WAN2 First" so, when the dynamic dns client checks the IPs, first checks WAN2 and, if it is enabled, assigns WAN2 Public IP to the dyndns account. If WAN2 is down, then checks WAN1 and if it is enabled, assigns WAN1 Public IP to the dyndns account.
But the problem is that the 2 WAN Interfaces (WAN1 and WAN2) are enabled, traffic goes out by the two WANs, but the dyndns account is always the WAN1 Public IP, instead of WAN2 Public IP.
What is the problem? (I'm getting crazy looking for a solution)
Thank you all for tour cooperation
Please Log in or Create an account to join the conversation.
- sbv3000
- Offline
- Junior Member
-
Less
More
- Posts: 63
- Thank you received: 0
22 Sep 2009 12:28 #2
by sbv3000
Replied by sbv3000 on topic DynDNS not working well with 2 WANs
I had the similar problem with ADSL and ethernet and two DynDNS domains.
I fixed it by making WAN1 'First' and WAN2 'Only' and the dynamic dns setup and it works fine since
I fixed it by making WAN1 'First' and WAN2 'Only' and the dynamic dns setup and it works fine since
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek