DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Connecting Be to WAN2 on my V2910
- lesd
- Topic Author
- Offline
- Member
-
Less
More
- Posts: 130
- Thank you received: 0
29 Sep 2009 20:11 #1
by lesd
Les
Connecting Be to WAN2 on my V2910 was created by lesd
I want to install a second line to act as a backup ADSL lime and am considering Be Unlimited or Be Pro.
Can I connect the Be Modem to WAN2 or do I need a V120?
Can I connect the Be Modem to WAN2 or do I need a V120?
Les
Please Log in or Create an account to join the conversation.
- runningdeere
- Offline
- Junior Member
-
Less
More
- Posts: 97
- Thank you received: 0
29 Sep 2009 20:33 #2
by runningdeere
Replied by runningdeere on topic Connecting Be to WAN2 on my V2910
You can put the BeBox into Bridge Mode and connect it to WAN2
Check the Be Forums for details
Check the Be Forums for details
Please Log in or Create an account to join the conversation.
- lesd
- Topic Author
- Offline
- Member
-
Less
More
- Posts: 130
- Thank you received: 0
29 Sep 2009 22:12 #3
by lesd
Les
Replied by lesd on topic Connecting Be to WAN2 on my V2910
Thank you. Will that be functionally equivalent to the V120 or would there be an advantage to using the V120?
Les
Please Log in or Create an account to join the conversation.
- runningdeere
- Offline
- Junior Member
-
Less
More
- Posts: 97
- Thank you received: 0
30 Sep 2009 08:08 #4
by runningdeere
Replied by runningdeere on topic Connecting Be to WAN2 on my V2910
Well the BeBox is supplied to you anyway, so unless you have a 120 already, I would just use the Bebox.
There are also reports that you may get a higher sync speed using the Bebox.
There are also reports that you may get a higher sync speed using the Bebox.
Please Log in or Create an account to join the conversation.
- lesd
- Topic Author
- Offline
- Member
-
Less
More
- Posts: 130
- Thank you received: 0
Moderators: Sami
Copyright © 2024 DrayTek