DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2930 setup problem
- jon3905
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 7
- Thank you received: 0
18 Oct 2009 12:06 #1
by jon3905
2930 setup problem was created by jon3905
Hi,
This is my first post, so hopefully it's in the right place, apologies if not.
I have just bought my first draytek product, so i'm completely new to all this. My ISP is bethere and i'm using the Bebox in bridge mode (i know it's a c**p box but i thought it would do for now!) Anyway, i've successfully configured the Bebox in bridge mode and it syncs with the ISP, i'm using this now with my PC plugged in to the Bebox direcly, so I know it's working. I've configured the 2930 but it won't connect to the ISP, the error message i'm getting is: Message [PPPoE: No response from server side]
Do I need to change the MAC address of the router to that of the Bebox, I think I read somewhere that BE use MAC authentication?
Or will the 2930 only work with the 120 modem?
Any help would be appreciated.
Thanks in advance
Jon
This is my first post, so hopefully it's in the right place, apologies if not.
I have just bought my first draytek product, so i'm completely new to all this. My ISP is bethere and i'm using the Bebox in bridge mode (i know it's a c**p box but i thought it would do for now!) Anyway, i've successfully configured the Bebox in bridge mode and it syncs with the ISP, i'm using this now with my PC plugged in to the Bebox direcly, so I know it's working. I've configured the 2930 but it won't connect to the ISP, the error message i'm getting is: Message [PPPoE: No response from server side]
Do I need to change the MAC address of the router to that of the Bebox, I think I read somewhere that BE use MAC authentication?
Or will the 2930 only work with the 120 modem?
Any help would be appreciated.
Thanks in advance
Jon
Please Log in or Create an account to join the conversation.
- pwatson
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 0
18 Oct 2009 16:11 #2
by pwatson
Replied by pwatson on topic 2930 setup problem
I believe Be doesn't support PPPoE as there's no need to log on.
I have the same setup as up and I have my WAN port set to DHCP
I have the same setup as up and I have my WAN port set to DHCP
Please Log in or Create an account to join the conversation.
- jon3905
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 7
- Thank you received: 0
18 Oct 2009 21:13 #3
by jon3905
Replied by jon3905 on topic 2930 setup problem
Cheers Peter,
That worked a treat!;-) Now connecting to ISP with my 2930 ;-)
Thanks
Jon
That worked a treat!
Thanks
Jon
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek