DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Draytek Vigor 2820n Internet via static IP
- mob
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
17 Nov 2009 15:17 #1
by mob
Draytek Vigor 2820n Internet via static IP was created by mob
Hi,
i'm working in an office, where right now there is an old DOS based computer with IPRoute (http://www.jacco2.dds.nl/isdn/ipr_ispa.html ) running which connects our subnet to the internet. The subnet is part of a bigger network in our building providing just the internet for us. We are in no other way connected.
we now want to get rid of the old 486er pc and replace it with the draytek vigor 2820n. but i'm stuck in the configuration process.
this is how the actual config with iproute looks like:
packet en0 0x62 192.168.0.1/24
packet en1 0x63 192.168.180.253/24
nat en1 * * 192.168.180.253
route * en1 192.168.180.254 metric 1
rip en0
and this is the actual routing table:
Destination Interface: Router:
C 192.168.0.0/24 en0
C 192.168.180.0/24 en1
S default en1 192.168.180.254
i'm using wan2 with static IP adress. it says i am connected to the internet. but ping and whatsoever is not working... you got any hints, on how to configure the draytek?
thank you in advance.
regards mob
some infos about the iproute config:
route [] [metric ]
[preference] [perm] [label
i'm working in an office, where right now there is an old DOS based computer with IPRoute (
we now want to get rid of the old 486er pc and replace it with the draytek vigor 2820n. but i'm stuck in the configuration process.
this is how the actual config with iproute looks like:
packet en0 0x62 192.168.0.1/24
packet en1 0x63 192.168.180.253/24
nat en1 * * 192.168.180.253
route * en1 192.168.180.254 metric 1
rip en0
and this is the actual routing table:
Destination Interface: Router:
C 192.168.0.0/24 en0
C 192.168.180.0/24 en1
S default en1 192.168.180.254
i'm using wan2 with static IP adress. it says i am connected to the internet. but ping and whatsoever is not working... you got any hints, on how to configure the draytek?
thank you in advance.
regards mob
some infos about the iproute config:
route
[preference
Please Log in or Create an account to join the conversation.
- nded01
- Offline
- New Member
-
Less
More
- Posts: 5
- Thank you received: 0
20 Nov 2009 09:27 #2
by nded01
Replied by nded01 on topic Draytek Vigor 2820n Internet via static IP
give wan2 a static ip of 192.168.180.253 (or whatever you have been assigned on that subnet)
Set up a static route on WAN 2 interface as destination 0.0.0.0 subnet mask 0.0.0.0 going to 192.168.180.254.
Set all clients to use the LAN ip of the router.
if this doesn't work can you post what ping message you get back? Destination host unreachable usually points to a routing problem.
Set up a static route on WAN 2 interface as destination 0.0.0.0 subnet mask 0.0.0.0 going to 192.168.180.254.
Set all clients to use the LAN ip of the router.
if this doesn't work can you post what ping message you get back? Destination host unreachable usually points to a routing problem.
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek