DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Have MTU telnet commands changed on 2820
- stevenball
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 18
- Thank you received: 0
24 Nov 2009 09:47 #1
by stevenball
Have MTU telnet commands changed on 2820 was created by stevenball
I have managed to change the MTU settings on our 2800 router using the wan ppp_mss command, when I use this command on our 2820 I get the following message back.....
> wan ppp_ms ?
% Valid subcommands are:
mtu mtu2 DF_check disable forward modem
detect
If I try to set the MTU size using the following wan ppp_mss 1458 I get the same reply.
Any idea's on the correct syntax to use ?
> wan ppp_ms ?
% Valid subcommands are:
mtu mtu2 DF_check disable forward modem
detect
If I try to set the MTU size using the following wan ppp_mss 1458 I get the same reply.
Any idea's on the correct syntax to use ?
Please Log in or Create an account to join the conversation.
- voodle
- Offline
- Big Contributor
-
Less
More
- Posts: 1139
- Thank you received: 0
24 Nov 2009 12:29 #2
by voodle
Replied by voodle on topic Have MTU telnet commands changed on 2820
Yep, they've changed the MTU command from wan ppp_mss to wan mtu, so you'd need to enter wan mtu 1458 to change it now. I think the change was made with 3.3.3
Please Log in or Create an account to join the conversation.
- stevenball
- Topic Author
- Offline
- Junior Member
-
Less
More
- Posts: 18
- Thank you received: 0
24 Nov 2009 12:38 #3
by stevenball
Replied by stevenball on topic Have MTU telnet commands changed on 2820
Many thanks, thats great, I thought I was going mad. ![:D :D](/media/kunena/emoticons/1.png)
![:D :D](/media/kunena/emoticons/1.png)
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek