DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2710n QoS stupidity...

More
14 Dec 2009 12:39 #59346 by philby
Replied by philby on topic 2710n QoS stupidity...
Hi there

I've been trying that, but 'telnet' is not recognised as a command.

I'm typing: 'telnet 192.168.1.xxx' (no quotes) on Win 7 - admin. account.

Maybe I'm missing something here...

philby

Please Log in or Create an account to join the conversation.

More
14 Dec 2009 12:57 #59347 by philby
Replied by philby on topic 2710n QoS stupidity...
OK, cancel the above - Telnet client was not running in Windows....

Thanks for the commands.

philby

Please Log in or Create an account to join the conversation.

More
06 Jan 2010 10:33 #59662 by eddyad
Replied by eddyad on topic 2710n QoS stupidity...
I've just installed a 2710n - first experience with a router. It was a real hassle until I discovered that the Network Adaptor in the Device Manager was disabled (Start, Control Panel, System, Hardware, Device manager) . Then it was OK. At present network is just wired to first PC.

I've read about turning off QoS in this thread, but I'm not sure about the router password mentioned by danfloun. The only passsword I put in was my ISP's. I tried that and it doesn't work.

Please Log in or Create an account to join the conversation.

More
06 Jan 2010 10:46 #59664 by eddyad
Replied by eddyad on topic 2710n QoS stupidity...
Had a sudden thought - default password was 'admin'
Works now :)

Please Log in or Create an account to join the conversation.

  • danfloun
  • Topic Author
  • Offline
  • New Member
  • New Member
More
30 Mar 2010 23:24 #61459 by danfloun
Replied by danfloun on topic Update! for firmware version 3.3.2
Just to update this thread;

As of firmware version 3.3.2 for the Vigor 2710, Vigor 2710n & Vigor 2710Vn, the above commands to disable QoS have changed very slightly.

Mode 0 = disables QoS
Mode 1 = enables QoS for inbound traffic
Mode 2 = enables QoS for outbound traffic

So to disable QoS, enter these commands;

Code:
qos setup -m 0 sys commit sys reboot


I haven't tested whether it's necessary, but I also enter the commands below, just to make sure upload and download are at maximum transmission.

Code:
adsl txpct 100 adsl rxpct 100 adsl reboot


Danny

Please Log in or Create an account to join the conversation.

More
09 Jun 2010 20:02 #62297 by dash
Replied by dash on topic 2710n QoS stupidity...
Thanks

Shame QoS settings not available in router interface (should be disabled anyway on non-voip routers

Dave

Please Log in or Create an account to join the conversation.

Moderators: Sami