DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 120 Adsl ethernet modem
- cypher12
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 1
- Thank you received: 0
02 Dec 2009 10:46 #1
by cypher12
Vigor 120 Adsl ethernet modem was created by cypher12
I have recently purchased the Vigor 120 Adsl ethernet modem and tried connecting it to my D-link DIR-855, but when I go into the modem webpage it tells me that the link status is not connected and I have no ip address and no gateway. I am trying to use it for my Eclipse Broadband. These are my setting for Eclipse: IP Address(es)-Dynamically Assigned VPI=0 VCI=38
RFC2364 PPPoATM VC - Null Encapsulation
Multimode
AutoModulation
DNS Settings-Dynamically assigned
Could someone tell what I am doing wrong?
RFC2364 PPPoATM VC - Null Encapsulation
Multimode
AutoModulation
DNS Settings-Dynamically assigned
Could someone tell what I am doing wrong?
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
-
Less
More
- Posts: 1723
- Thank you received: 0
02 Dec 2009 11:52 #2
by admin
Forum Administrator
Replied by admin on topic Vigor 120 Adsl ethernet modem
If you bought it within the past 2 weeks, it's possible it doesn't have the correct UK settings. Contact DrayTek support as there was a batch a couple of weeks ago which were not correct (you can adjust it yourself, you don't have to send it back).
Forum Administrator
Please Log in or Create an account to join the conversation.
- dire_wolf
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
02 Dec 2009 14:18 #3
by dire_wolf
Replied by dire_wolf on topic Vigor 120 Adsl ethernet modem
Also, once you've got it up and running you will need to update the firmware to the latest rev from the website, mine was rubbish (kept dropping/resyncing the connection) until I updated it and now it works perfectly
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek