DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Open Ports & MS Small Business Server 2008
- lescltd
- Topic Author
- Offline
- New Member
Less
More
- Posts: 2
- Thank you received: 0
03 Dec 2009 16:45 #59172
by lescltd
Open Ports & MS Small Business Server 2008 was created by lescltd
Can anyone give me instruction for opening Ports on a 2800VG router.
Also if anyone can give information regarding use with MS Small Business Server 2008 for the exchange sever this would also be very helpful.
Thank you .
David.
Also if anyone can give information regarding use with MS Small Business Server 2008 for the exchange sever this would also be very helpful.
Thank you .
David.
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
03 Dec 2009 16:57 #59174
by admin
Forum Administrator
Replied by admin on topic Open Ports & MS Small Business Server 2008
It'd a bit old, but the principles haven't changed so much:
http://www.support.draytek.co.uk/kb_vigor_portforwarding.html
Forum Administrator
Please Log in or Create an account to join the conversation.
- spence
- Offline
- Junior Member
Less
More
- Posts: 19
- Thank you received: 0
04 Dec 2009 20:44 #59200
by spence
On the router home page, go to NAT -> Open Ports.
Open the following ports based on what services you want available:
Port 25, Protocol TCP for SMTP (email)
Port 443, 444 and 4125, all TCP, for OWA/RWW
Also make sure you set the IP address of the server as the Local Computer.
Replied by spence on topic Re: Open Ports & MS Small Business Server 2008
Can anyone give me instruction for opening Ports on a 2800VG router.LESCLTD wrote:
Also if anyone can give information regarding use with MS Small Business Server 2008 for the exchange sever this would also be very helpful.
Thank you .
David.
On the router home page, go to NAT -> Open Ports.
Open the following ports based on what services you want available:
Port 25, Protocol TCP for SMTP (email)
Port 443, 444 and 4125, all TCP, for OWA/RWW
Also make sure you set the IP address of the server as the Local Computer.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek