DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
2930 and ISDN backup
- lozstlouis
- Topic Author
- Offline
- Member
Less
More
- Posts: 107
- Thank you received: 0
16 Dec 2009 11:29 #59371
by lozstlouis
www.alits.co.uk
2930 and ISDN backup was created by lozstlouis
Anyone tried to make this work?
I have it setup with a Vigor 100 on WAN1 and an ISDN2e on the basic rate port. If i tug the Ethernet then ISDN kicks in fine. If I tug the RJ11 to DSL it doesn't fail over. I have set the "WAN Connection Detection" to the ISP gateway & the TTL to 10. Still no cigar when i tug the RJ11. Ideas anyone?
I have it setup with a Vigor 100 on WAN1 and an ISDN2e on the basic rate port. If i tug the Ethernet then ISDN kicks in fine. If I tug the RJ11 to DSL it doesn't fail over. I have set the "WAN Connection Detection" to the ISP gateway & the TTL to 10. Still no cigar when i tug the RJ11. Ideas anyone?
Please Log in or Create an account to join the conversation.
- lozstlouis
- Topic Author
- Offline
- Member
Less
More
- Posts: 107
- Thank you received: 0
16 Dec 2009 11:30 #59372
by lozstlouis
www.alits.co.uk
Replied by lozstlouis on topic 2930 and ISDN backup
Using firmware 3.2.3 and also the previous version. No difference. "WAN connection detecion" is on "ping" rather than "ARP".
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek