DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Draytek 2800 Firmware bricked another router what the f**k

  • puregeordie
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Feb 2010 12:47 #60281 by puregeordie
Cannot believe it thought I'd upgrade another one of my routers and its done exactly the same thing. All I'm doing is connecting it to a PC by itself downloaded the file and ran the upgrade software on the router. bla bla bla and its broke it, exactly the same as my 2820,.

Draytek are :evil:

Any ideas as I'm totally knackered now.

It just keeps restarting itself. same as the other one in a loop.

Seriously don't upgrade a router as you brick it.

Please Log in or Create an account to join the conversation.

  • puregeordie
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Feb 2010 13:34 #60284 by puregeordie
As with my other post for the possibly knackered 2820, I have also tried factory resetting which dows nowt.

Both routers still do exactly the same.

Can Anybody can help me please,

How can these routers just go faulty like this, I've never known anything like it. surley they must have a fallback option to get these back to normal.

please please help me. or do I just throw them both out the window.

cheers
si

Please Log in or Create an account to join the conversation.

More
03 Feb 2010 14:11 #60287 by voodle
Which firmware did you go from and to with this router?
Neither of the routers is knackered, you just need to reflash them.

If you're going between quite old versions of the firmware and newest versions, back up the configuration then reflash the router using the .rst file, then restore the configuration. It looks like that would be more reliable in your situation.

Please Log in or Create an account to join the conversation.

  • puregeordie
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Feb 2010 14:47 #60291 by puregeordie
I cannot do this. I cannot reflash them as I do not get an ip from either of them. how do you propose I do this. Is their some other way.

They both just seem to be restarting or stuck in a loop or something.

Thanks for your reply.

si

Please Log in or Create an account to join the conversation.

More
03 Feb 2010 15:07 #60294 by voodle
Did you follow the guide I linked in the other thread? you might have to set the IP address manually to the router's default subnet so put the IP address as:
IP: 192.168.1.20
subnet: 255.255.255.0
gateway & dns blank because they're not needed for this

Please Log in or Create an account to join the conversation.

  • puregeordie
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
03 Feb 2010 15:16 #60299 by puregeordie

Voodle wrote: Did you follow the guide I linked in the other thread? you might have to set the IP address manually to the router's default subnet so put the IP address as:
IP: 192.168.1.20
subnet: 255.255.255.0
gateway & dns blank because they're not needed for this



OK I'll check that out.

Thanks.

Please Log in or Create an account to join the conversation.

Moderators: Sami