DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 3300 WAN setup

thirst4knowledge
Topic Author
Offline
Junior Member

04 Feb 2010 16:14 #60333 by thirst4knowledge

Vigor 3300 WAN setup was created by thirst4knowledge

Hi Peeps,

My company have purchased a Vigor 3300 hardware version 1.0 firmware version 26.0.0

I am struggling on the setup of the wan options.

we have 2 ADSL connections from our ISP which were are plugging into 2 separate Vigor 120 ADSL2/2+ modems, these modems are plugged into WAN ports 1 & 2 respectivly.

My ISP have provided us with a range of Public IP addresses we can use

Now when I log into the wan set-up page I'm not sure which option to

choose from:

1)Static

> (My first instinct is this)

2)PPPoE

> (The use of the vigor 120 Adsl modems make me think I may have to use this)

3)DHCP

>( Not this)
4)PPTP

>(Not This)
5)DMZ

>(Not this)

Thanks
T4k

Please Log in or Create an account to join the conversation.

thirst4knowledge
Topic Author
Offline
Junior Member

04 Feb 2010 17:01 #60334 by thirst4knowledge

Replied by thirst4knowledge on topic Vigor 3300 WAN setup

Im begging to think that it should be PPPoE.

But the question is do I need to change the MAC address on the 3300 setings to that of the vigor 120 adsl modems ?

Please Log in or Create an account to join the conversation.

voodle
Offline
Big Contributor

04 Feb 2010 17:34 #60338 by voodle

Replied by voodle on topic Vigor 3300 WAN setup

If your ADSL connections have usernames/passwords then yeah it would be PPPoE, you don't need to change the MAC address or anything, just enter the username/pass details, it shows on here how you'd do it:
http://draytek.co.uk/support/kb_vigor100_setup.html

Please Log in or Create an account to join the conversation.

thirst4knowledge
Topic Author
Offline
Junior Member

04 Feb 2010 21:00 #60341 by thirst4knowledge

Replied by thirst4knowledge on topic Vigor 3300 WAN setup

yes my ISP dose require username and password. Thanks for the link, I will post back when im at work tomorrow

Please Log in or Create an account to join the conversation.

thirst4knowledge
Topic Author
Offline
Junior Member

05 Feb 2010 09:31 #60348 by thirst4knowledge

Replied by thirst4knowledge on topic Vigor 3300 WAN setup

Voodle wrote: If your ADSL connections have usernames/passwords then yeah it would be PPPoE, you don't need to change the MAC address or anything, just enter the username/pass details, it shows on here how you'd do it:
http://draytek.co.uk/support/kb_vigor100_setup.html

Thats the original article I used to set-up.

but the wan connections do not come up under the "Status" menu

I presume that I will need to use the "IP alias" option for multiple WAN IP's.....

only problem is the "IP ALias" options do not show up once you choose the PPoE option...

Please Log in or Create an account to join the conversation.

thirst4knowledge
Topic Author
Offline
Junior Member

05 Feb 2010 09:36 #60350 by thirst4knowledge

Replied by thirst4knowledge on topic Vigor 3300 WAN setup

Thirst4Knowledge wrote:
Voodle wrote: If your ADSL connections have usernames/passwords then yeah it would be PPPoE, you don't need to change the MAC address or anything, just enter the username/pass details, it shows on here how you'd do it:
http://draytek.co.uk/support/kb_vigor100_setup.html

Thats the original article I used to set-up.

but the wan connections do not come up under the "Status" menu

I presume that I will need to use the "IP alias" option for multiple WAN IP's.....

only problem is the "IP ALias" options do not show up once you choose the PPoE option...

AHA, I just checked the latest firmware and read the release notes it says one of the "improvments" in the new firmware is :

Add IP Alias function in PPPoE mode.

My firmware is 2.6.0.0

the latest release is 2.6.1.0

I guess that moves me forward some what

will report back soon

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami