DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Vigor 2800 Port 80 Filter Setup
- vanillaice
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
08 Feb 2010 11:21 #60417
by vanillaice
Vigor 2800 Port 80 Filter Setup was created by vanillaice
Hi,
I am trying to stop a local PC from having access to all websites (Port 80), but wish to allow AV updates to still come through. Therefore I do not wish to block all internet access to the PC.
I have followed the FAQ guide found here:http://www.draytek.co.uk/support/kb_vigor_filtering.html
However, it hasn't worked. After I apply the settings, the destination start and end ports I enter disappear.
Am I missing something?
I am offsite at the moment, but I am certain the router is running the latest official firmware.
Thanks in advance,
ICE
I am trying to stop a local PC from having access to all websites (Port 80), but wish to allow AV updates to still come through. Therefore I do not wish to block all internet access to the PC.
I have followed the FAQ guide found here:
However, it hasn't worked. After I apply the settings, the destination start and end ports I enter disappear.
Am I missing something?
I am offsite at the moment, but I am certain the router is running the latest official firmware.
Thanks in advance,
ICE
Please Log in or Create an account to join the conversation.
- rothers
- Offline
- Member
Less
More
- Posts: 143
- Thank you received: 0
08 Feb 2010 11:35 #60418
by rothers
You haven't selected a protocol.
Replied by rothers on topic Re: Vigor 2800 Port 80 Filter Setup
After I apply the settings, the destination start and end ports I enter disappear.vanillaice wrote:
Am I missing something?
You haven't selected a protocol.
Please Log in or Create an account to join the conversation.
- vanillaice
- Topic Author
- Offline
- New Member
Less
More
- Posts: 3
- Thank you received: 0
08 Feb 2010 11:36 #60419
by vanillaice
Replied by vanillaice on topic Vigor 2800 Port 80 Filter Setup
I'm certain I had selected TCP as shown in the screen shot of the instructions.
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek