DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
cant access my 2710n
- gwyncj
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
10 Feb 2010 20:07 #60466
by gwyncj
cant access my 2710n was created by gwyncj
Hi there
Im having issues with my 2710n.
I upgraded the firmware to the newest available. It worked fine, however I realised that my speed was lower and decided to reboot the router.
After the reboot I lost connection and the only lights flashing are ACT and WLAN. When I try to access the router with 192.168.1.1, it wont let me in.
I have tried to restoring to factory settings which didnt help.
The router seems to be talking to my laptop as its allocating an ip address, but I can access the router.
I would appreciate any help.
Im having issues with my 2710n.
I upgraded the firmware to the newest available. It worked fine, however I realised that my speed was lower and decided to reboot the router.
After the reboot I lost connection and the only lights flashing are ACT and WLAN. When I try to access the router with 192.168.1.1, it wont let me in.
I have tried to restoring to factory settings which didnt help.
The router seems to be talking to my laptop as its allocating an ip address, but I can access the router.
I would appreciate any help.
Please Log in or Create an account to join the conversation.
- gwyncj
- Topic Author
- Offline
- New Member
Less
More
- Posts: 5
- Thank you received: 0
11 Feb 2010 00:19 #60468
by gwyncj
Replied by gwyncj on topic cant access my 2710n
Iv sorted it.
The firmware update got corrupted some how.
I had to re-flash the bios using the original windows TFTP client utility.
This wouldnt work in win7 but worked fine in winxp.
cheers
The firmware update got corrupted some how.
I had to re-flash the bios using the original windows TFTP client utility.
This wouldnt work in win7 but worked fine in winxp.
cheers
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek