DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

2820Vn Reboot Constantly

  • plandregan
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
20 Feb 2010 19:37 #60658 by plandregan
2820Vn Reboot Constantly was created by plandregan
I have my 2820 for a few months and after a few teething issues with VoIP its been fairly stable.

However today its started to reboot randomly, sometimes after a few seconds, others a few hours. No config has changed nothing. Yet its decided to reboot.

Using 3.3.3_232201 release of firmware.

Is there a debug mode to see why its rebooting all of a sudden??

Please Log in or Create an account to join the conversation.

More
22 Feb 2010 13:04 #60683 by macavity
Replied by macavity on topic 2820Vn Reboot Constantly
The telnet command
Code:
sys ver dbg
is what the DrayTek support ask for.

I know that DHCP Relay function should be set to disabled on 3.3.3 as with it enabled I've seen it cause a reboot.

Please Log in or Create an account to join the conversation.

  • plandregan
  • Topic Author
  • Offline
  • Junior Member
  • Junior Member
More
22 Feb 2010 18:23 #60692 by plandregan
Replied by plandregan on topic 2820Vn Reboot Constantly
Thanks for the commands.

I dont use DHCP relay, but I do use it as a DHCP server with many reservations in the IP Bind section, to make sure all my PC's get the same IP and not have to manually configure each one

Please Log in or Create an account to join the conversation.

More
28 Feb 2010 18:25 #60844 by acl
Replied by acl on topic 2820Vn Reboot Constantly
hi i've just update to 3.3.3 (successsfully according to upgrade wizard) and this same error is constantly happening to mine also. It does not even recognise any lan or wan connection.

I tried the factory reset, but that too does not help. any ideas?

Please Log in or Create an account to join the conversation.

More
18 Apr 2010 13:39 #61713 by simon_lumb
Replied by simon_lumb on topic 2820Vn Reboot Constantly
Greetings

I appear to have screwed a 2820n by putting on firmware 3.3.3

Factory resetting doesn't seem to help so what options to I have?

Please Log in or Create an account to join the conversation.

More
19 Apr 2010 09:38 #61717 by voodle
Replied by voodle on topic 2820Vn Reboot Constantly
You need to reflash the firmware using the .rst file while the router is in firmware recovery mode when that happens, this page under Abnormal Firmware Conditions explains how you'd do that:
http://draytek.co.uk/support/kb_vigor_reflash.html#reflash

Please Log in or Create an account to join the conversation.

Moderators: Sami