DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Upgraded firmware on Vigor 2600. Works fine, but no Web GUI

  • rhumby
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Feb 2010 21:02 #60787 by rhumby
Upgraded firmware on Vigor 2600. Works fine, but no Web GUI was created by rhumby
Used the TFTP program to upgrade to the latest firmware (.all file). Seemed to work ok.

It reset, and connected - all users ok. But no web gui any more. Errors:

"File system invalid. The file system of web-based UI is incinsistent with router's firmware. Please check the firmware version".

I can telnet to it. Is there a telnet command to enable the GUI?

Please Log in or Create an account to join the conversation.

More
25 Feb 2010 22:57 #60790 by cyber-mav
Replied by cyber-mav on topic Upgraded firmware on Vigor 2600. Works fine, but no Web GUI
looks like you put the wrong firmware on or corrupt firmware.

Please Log in or Create an account to join the conversation.

More
25 Feb 2010 23:46 #60795 by voodle
Replied by voodle on topic Upgraded firmware on Vigor 2600. Works fine, but no Web GUI
Yeah that's mostly caused by a bad config, reflash it with the .rst file and you should have a working router again.

Please Log in or Create an account to join the conversation.

  • rhumby
  • Topic Author
  • Offline
  • New Member
  • New Member
More
26 Feb 2010 17:31 #60817 by rhumby
Replied by rhumby on topic Upgraded firmware on Vigor 2600. Works fine, but no Web GUI
Will do. Many thanks.

Please Log in or Create an account to join the conversation.

Moderators: Chris, Sami