DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 120 + Netgear FVX538 2nd WAN Port

More
04 Mar 2010 17:44 #60984 by ajsg
Slight issue here, I can connect using the Vigor 120 when connected using a PC (needs BT supplied user & password), but when I plug it in the WAN port it doesn't actually connect. The FVX reports a connected status (green light), but the Vigor reports no connection (no green light on internet).

Interestingly if I set the WAN port user & pass it simply doesn't connect.

So, with no use and pass th FVX reports a connection, but I cannot reach the internet.

Now is this because I am running NAT rather than Classic Routing? If so I have a real problem, as my other connection (Colt Fibre) is an RJ45 presentation that requires NAT.

Any ideas would be much appreciated...

Please Log in or Create an account to join the conversation.

More
05 Mar 2010 12:56 #61005 by nealuk
Replied by nealuk on topic Vigor 120 + Netgear FVX538 2nd WAN Port
I must admin I'm not familiar with the Netgear FVX 538 - but I have got a DV120 working with a DV2950.

You mentioned the BT username and password, have you put these in to the Netgear WAN2 settings ?

The symptoms you describe suggest the DV120 is waiting for the ISP settings.

Regards,

Neal

Please Log in or Create an account to join the conversation.

More
05 Mar 2010 13:00 #61006 by ajsg
Replied by ajsg on topic Vigor 120 + Netgear FVX538 2nd WAN Port

nealuk wrote:
The symptoms you describe suggest the DV120 is waiting for the ISP settings.

Regards,

Neal



I can query the WAN port and it returns me external IP addresses...

Bit stumped...

Please Log in or Create an account to join the conversation.

Moderators: Sami