DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Can V120 connect to V2820 WAN2 port via wireless bridge?
- johnsc
- Topic Author
- Offline
- Junior Member
Less
More
- Posts: 20
- Thank you received: 0
06 Mar 2010 01:18 #61025
by johnsc
Can V120 connect to V2820 WAN2 port via wireless bridge? was created by johnsc
Can anyone comment on the V120 modem connecting to the V2820 WAN 2 but through a wireless link:
ADSL/PPPoA--V120(fixed IP)--PPPoE--wireless in bridge mode>><<wireless in bridge mode----V2820Vn WAN2 (with DHCP on) connected to LAN via--- and <<>>
I need to bring the internet from a distant building to an existing LAN but only 0.5Mbps ADSL due to distance from exchange.
--- = wired ethernet
<<>> = wirleless
The wireless link should just act just like ethernet cable but will the v120 see it that way?
thanks
ADSL/PPPoA--V120(fixed IP)--PPPoE--wireless in bridge mode>><<wireless in bridge mode----V2820Vn WAN2 (with DHCP on) connected to LAN via--- and <<>>
I need to bring the internet from a distant building to an existing LAN but only 0.5Mbps ADSL due to distance from exchange.
--- = wired ethernet
<<>> = wirleless
The wireless link should just act just like ethernet cable but will the v120 see it that way?
thanks
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
Less
More
- Posts: 1723
- Thank you received: 0
07 Mar 2010 20:51 #61040
by admin
Forum Administrator
Replied by admin on topic Can V120 connect to V2820 WAN2 port via wireless bridge?
Hmmm...it should be possible with a pair of wireless devices (one at each end) bridging, as long as the one with the Vigor120 is an Ethernet router with PPPoE facility (e.g. Vigor2910). Not really a tried and tested intended method but I think it should work...
Forum Administrator
Please Log in or Create an account to join the conversation.
- danieln
- Offline
- Junior Member
Less
More
- Posts: 11
- Thank you received: 0
12 Mar 2010 11:51 #61134
by danieln
Replied by danieln on topic Can V120 connect to V2820 WAN2 port via wireless bridge?
Are the buildings on same power? If so could you not use some homeplug adaptors?
Please Log in or Create an account to join the conversation.
Moderators: Chris, Sami
Copyright © 2024 DrayTek