DrayTek UK Users' Community Forum
Help, Advice and Solutions from DrayTek Users
Connecting an ESXi server to a 2820n
- rhoades-brown
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
18 Mar 2010 19:25 #1
by rhoades-brown
Connecting an ESXi server to a 2820n was created by rhoades-brown
Hi
I am just about to purchase a 2820n, connecting it’s gigabit port to a ESXi 4 server. In this configuration, I want to configure 2 VLANs in a trunk on the gigabit port.
I have a range of IP addresses, and would like to have one VLAN for internet facing IP addresses and the other for a NAT’ed internet range (192.168.0.x for example).
My questions are-
- If I configure 2 VLANs on the same port, will the Draytek tag them properly?
- Will the router NAT and pass through the internet IP’s at the same time?
- Can anybody see any issues with this kind of configuration?
Kind Regards,
Mark
I am just about to purchase a 2820n, connecting it’s gigabit port to a ESXi 4 server. In this configuration, I want to configure 2 VLANs in a trunk on the gigabit port.
I have a range of IP addresses, and would like to have one VLAN for internet facing IP addresses and the other for a NAT’ed internet range (192.168.0.x for example).
My questions are-
- If I configure 2 VLANs on the same port, will the Draytek tag them properly?
- Will the router NAT and pass through the internet IP’s at the same time?
- Can anybody see any issues with this kind of configuration?
Kind Regards,
Mark
Please Log in or Create an account to join the conversation.
- rhoades-brown
- Topic Author
- Offline
- New Member
-
Less
More
- Posts: 2
- Thank you received: 0
21 Mar 2010 12:15 #2
by rhoades-brown
Replied by rhoades-brown on topic Any information about VLAN tagging?
Hi All,
Just as a follow up to this, what I think I really need to know is, does the Draytek tag the packets with VLAN information, and if it does how can you control which ports it tags, and which ports it dosen't?
Just as a follow up to this, what I think I really need to know is, does the Draytek tag the packets with VLAN information, and if it does how can you control which ports it tags, and which ports it dosen't?
Please Log in or Create an account to join the conversation.
- admin
- Offline
- Site Admin
-
Less
More
- Posts: 1723
- Thank you received: 0
21 Mar 2010 17:16 #3
by admin
Forum Administrator
Replied by admin on topic Connecting an ESXi server to a 2820n
It's not supported; it's not tagged VLAN (802.1q etc.) it's just port based VLAN.
Forum Administrator
Please Log in or Create an account to join the conversation.
Moderators: Sami
Copyright © 2024 DrayTek