DrayTek UK Users' Community Forum

Help, Advice and Solutions from DrayTek Users

Vigor 120 web interface/IP address

  • richardmccaig
  • Topic Author
  • Offline
  • New Member
  • New Member
More
25 Jun 2010 16:28 #62490 by richardmccaig
Vigor 120 web interface/IP address was created by richardmccaig
Using a 120 modem with a 2950 router.

Just upgraded to ADSL 2+ but 120 not recognising and apparently stuck on ADSL. I want to manually change the modulation to G.992.5 but, having (probably) changed the 120's IP address, I can't now access it from the web interface.

Is there a way to determine its IP address/access it from within the 2950 or is it a question of connecting the laptop to it directly to determine the address?

Thanks...

Please Log in or Create an account to join the conversation.

More
28 Jun 2010 18:58 #62532 by the pit
Replied by the pit on topic Vigor 120 web interface/IP address
I tried port forwarding on a 2920 but that didn't work. The only thing I can think of is plugging directly into it and refreshing the ip address of your pc.

Please Log in or Create an account to join the conversation.

  • richardmccaig
  • Topic Author
  • Offline
  • New Member
  • New Member
More
29 Jun 2010 10:31 #62552 by richardmccaig
Replied by richardmccaig on topic Vigor 120 web interface/IP address

The PIT wrote: I tried port forwarding on a 2920 but that didn't work. The only thing I can think of is plugging directly into it and refreshing the ip address of your pc.



Agreed. Thanks for trying but it seems that direct connection is the only way. I have asked Draytek Support but no reply (yet).

Please Log in or Create an account to join the conversation.

More
02 Jul 2010 15:40 #62651 by nealuk
Replied by nealuk on topic Vigor 120 web interface/IP address
Hi, we have the same set-up here with 120 and 2950.

Just temporarily connect the Vigor120 directly to a PC. The Modem is likely to be on 192.168.2.1 and give your machine an IP of 192.168.2.10

It should just take a minute or two.

Regards,

Neal

Please Log in or Create an account to join the conversation.

More
02 Jul 2010 16:09 #62652 by rothers
Replied by rothers on topic Vigor 120 web interface/IP address
You can also simply connect the LAN port of the 120 to a LAN port on the 2950 then connect another LAN port on the 2950 to the appropriate WAN port on the 2950. No need for temporary re-wiring this way.

Please Log in or Create an account to join the conversation.

Moderators: ChrisSami